6
Procedure
1
Turn the computer off and connect the CD drive to the com-
puter.
2
<Only when using the CD-ROM drive Panasonic KXL-
RW10A>
Connect the floppy disk drive to the USB port of the com-
puter, then set the FIRSTAID FD in the floppy disk drive.
3
Turn the computer on.
4
When the message [Press F2 to enter SETUP] is displayed,
press
F2
and then run the Setup Utility.
If the password has been set, enter the Supervisor Password.
5
Press
F9
.
At the confirmation message, select [Yes] and then press
Enter
.
6
<Only when using the CD-ROM drive Panasonic KXL-
RW21A>
Select [Boot] menu, then select [CD Drive] and press
F6
until [CD Drive] is at the top of the [Boot] menu.
7
Place disc number one of the recovery CDs into the CD drive.
Supplementary Instructions
Hard Disk Data Erase Utility
Add “Hard Disk Data Erase Utility” as follows.
This computer is equipped with a utility for completely erasing hard disk data.
When disposing of or transferring ownership of this device, erase all data on the hard disk in order to prevent the theft of hard disk
data following the steps below.
The hard disk data erase utility erases data using an “overwriting” method, but there is a possibility that due to malfunctions or
other operational errors, data may not be completely erased. There are also specialized devices that may be able to read data
that has been erased using this method. If you need to erase highly confidential data, we recommend that you contact a
company that specializes in this process. Matsushita Electric Industrial Co., Ltd. will bear no responsibility for losses or
damages suffered as a result of the use of this utility.
NOTE
Be sure the AC adaptor is connected until the procedure is completed.
This utility can only be used for internal hard disk. It cannot be used to erase data from the second hard disk or external hard
disks.
This utility cannot erase data from damaged disk.
This utility cannot erase data for specific partitions.
After executing this utility, the computer cannot be booted from the hard disk.
Preparing
Product Recovery CD-ROM
CD-ROM drive Panasonic KXL-RW10A(PC Card-compatible) or KXL-RW21A(USB)
<Only when using the CD-ROM drive Panasonic KXL-RW10A>
External floppy disk drive (optional CF-VFDU03)
FIRSTAID FD created in advance
---------------------------------------------------------------------
Select a number
---------------------------------------------------------------------
1. Start restoring the operating system.
2. Erase the whole data on HDD for security.
3. End
---------------------------------------------------------------------
8
Press
F10
.
At the confirmation message, select [Yes] and press
Enter
.
The computer will reboot, and this screen should appear.
9
Select [2. Erase the whole data on HDD for security.].
10
At the confirmation message, press
Y
.
11
At [<<< Start menu >>>], press
Enter
.
12
The time required for erasing data will be displayed.
Press
Space
.
13
At the confirmation message, press
Enter
.
The operation of erasing the hard disk starts.
14
After the operation is complete:
Under normal conditions, the message [Hard disk data has
been deleted.] will be displayed.
If a problem occurred during the operation, an error mes-
sage will be displayed.
15
Press
Enter
. The computer will be shut down.
