5
Windows XP
Windows 2000
---------------------------------------------------------------------
Select a number
---------------------------------------------------------------------
1. Restore Windows(R) 2000 Professional to the whole HDD.
2. Make two partitions, for the operating system and data. And restore
Windows(R) 2000 Professional to the operating system partition.
(All existing partitions on HDD will be lost.)
3. Restore Windows(R) 2000 Professional to the first partition
4. End
---------------------------------------------------------------------
---------------------------------------------------------------------
Select a number
---------------------------------------------------------------------
1. Restore Windows(R) XP Professional to the whole HDD.
2. Make two partitions, for the operating system and data. And restore
Windows(R) XP Professional to the operating system partition.
(All existing partitions on HDD will be lost.)
3. Restore Windows(R) XP Professional to the first partition
4. End
---------------------------------------------------------------------
12
Make a selection from the menu.
When selecting [2], enter the basic partition size for
the operating system installation and press
Enter
.
(The data partition size is the remainder after subtract-
ing the basic partition size.)
To select [3], the initial partition size must be 6 GB or
more of the hard disk size. Reinstallation cannot be
performed with a small partition size.
13
At the confirmation message , press
Y
.
The operation of reinstallation for the hard disk starts au-
tomatically. (The operations take about 15-40 minutes. The
time varies depending on the CD drive you use.)
When a message appears instructing you to insert the next
CD, insert the recovery CD showing the next number in
the sequence, and then select [OK].
If the message “The media does not contain the cor-
rect file” appears, select [OK]. A message will ap-
pear instructing you to insert the next CD.
Confirm that the proper recovery CD has been in-
serted by opening the tray of the CD drive and then
close the tray, then select [OK].
NOTE
When an UPDATE FD is to be created, follow the steps
in the readme.txt on the disk. (
“Operating Instruc-
tions” page 13)
NOTE
18
Press
F9
.
At the confirmation message, select [Yes] and then press
Enter
. (The Setup Utility settings will return to their
default values. Even the security settings with the excep-
tion of the password(s) will return to their default values.)
Change the settings where necessary.
19
Press
F10
.
At the confirmation message, select [Yes] and press
Enter
.
20
Perform the setup procedure for Windows by following
the instructions on the screen.
(Refer to the Supplementary Instructions for added func-
tions, if they are included with the computer.)
Windows 2000
“Operating Instructions” (page 11)
Windows XP
“Operating Instructions” (page 12)
10
Select [1. Yes, I agree to the provisions above and wish to
continue!].
11
This screen should appear.
14
After the reinstallation procedure completes, press
Enter
. The computer will be shut down.
15
<Only when using the CD-ROM drive Panasonic KXL-
RW10A>
Remove the FIRSTAID FD.
16
Remove the CD drive, and then turn the computer on.
17
When the message [Press F2 to enter SETUP] is displayed,
press
F2
and then run the Setup Utility.
If the password has been set, enter the Supervisor Pass-
word.
