![background image](http://html1.mh-extra.com/html/panasonic/cf-m34-series/cf-m34-series_operating-instructions-manual_3860643013.webp)
13
Getting Star
ted
3
Turn on your computer.
4
Prepare 2HD floppy disks and make sure they are
not in the write-protected state, and then set it.
5
Windows 2000
Select [Start] - [Programs] - [Panasonic] - [Create
Backup Disk] and follow the on-screen instruc-
tions.
Windows XP
Select [Start] - [All Programs] - [Panasonic] - [Cre-
ate Backup Disk] and follow the on-screen instruc-
tions.
6
Place a label identifying the contents on each disk.
Name of created backup disk
FIRSTAID FD
(When the display for creating the UPDATE FD is shown, create the
disk by following the on-screen instructions.)
CAUTION
Store the floppy disks in a safe place. They will enable you to return your com-
puter to close to the condition at the time of purchase should any problems occur.
When creating backup disks, do not run any other application program.
When creating backup disks and the message [Insufficient files to copy] is dis-
played, select [OK] and then contact Panasonic Technical Support.
While the floppy disk drive indicator is on, do not remove the floppy disk,
power down your computer or use the standby or hibernation function (
“Standby/Hibernation Functions”).
Be sure to create the backup disk.
If a backup disk is not created, it will be impossible to return the computer to its
original state. In this case, contact Panasonic Technical Support.
The floppy disk drive must be the A drive.
NOTE
1
Power off your computer (
Page 16)
Do not shut down using the standby or hibernation mode.
2
Connect the external floppy disk drive to your computer.
Create BACKUP Disks for Reinstallation
Label on the top surface,
and insert the shutter-
side headfirst.
USB Floppy
Disk Drive