background image

18

Battery Power

High temperature mode

The high temperature mode can prevent the battery from deteriorating when the computer is used in high-temperature envi-
ronment or used for a long time with its battery fully charged.
Select [Auto] (default) or [High Temperature] in [Environment] of the [Main] menu of the Setup Utility (

page 78

).

NOTE

Note that a level corresponding to a 100% charge for high temperature mode is approximately equivalent to an 80% 
charge level for normal temperature mode.
After switching from [Normal Temperature] to [High Temperature] or vice versa, the remaining battery capacity will not 
be displayed correctly until the battery pack is completely discharged or fully charged.
In the [Auto] mode:
Once the computer has automatically switched from the normal temperature mode to the high temperature mode, the 
computer will not switch back to the normal temperature mode until the battery has been used and recharged to a total 
charge level of about 5 times as much as that of the fully-charged state. This is to avoid battery deterioration.

Summary of Contents for CF-74 Series














































































































Reviews: