2 8
1 2
Delete the check mark
for [When powered by AC power]
in [Start] - [Settings] - [Control Panel] - [Power] - [Disk
Drives], then press
.
8
At the [Finishing Setup], remove the floppy disk and press
. Windows will restart after all the settings have
automatically been made.
9
At the [Date/Time Properties], press
.
1 0
At the [Add Printer Wizard], press
.
1 1
When the display appears indicating the establishment of
the system settings, press
.
The computer will reboot. (When the welcome screen ap-
pears, press
.)
Reinstalling Software
You will need the Firstaid FD (you earlier made copies of), Firstaid CD (included), Windows 95 CD (only use enclosed CD) and
a blank floppy disk for the startup disk.
With the exception of the instruction below, please se-
lect all default values displayed by the Setup Wizard.
Be sure to add the check mark
for [Sound, MIDI, or
Video Capture Card] at the [Analyzing Your Computer].
Have a blank disk on hand to create a "Windows 95
Startup Disk". Immediately after creating this disk, en-
ter the "Firstaid FD" into the floppy disk drive and press
. (Note: A system error will result if the
"Firstaid FD" is not inserted. If this occurs, insert the
"Firstaid FD" and press [Retry].)
N O T E
4
For beginners:
select [2. Restore HDD to factory de-
fault (For beginners)].
For advanced users: select [3. Restore HDD to factory de-
fault (For advanced users)]
At the confirmation message, press
. Simply follow the
on-screen instructions .
5
<For beginners only>
When your computer prompts you to insert the "Firstaid CD",
please do so. When the computer reboots, the startup menu
will appear, select 2 and continue to follow the on-screen in-
structions.
6
<For beginners only>
When your computer prompts you to insert the "Firstaid FD",
press
. When the computer reboots, the startup menu will
appear, select 2 and continue to follow the on-screen instruc-
tions.
Microsoft Windows 95 Startup Menu
1. Boot
2. Restore HDD to factory default (For beginners)
3. Restore HDD to factory default (For advanced users)
Enter a choice: 1
1
Insert the "Firstaid FD", and turn the computer on, then run
the Setup Utility program. (
page 34)
2
Select [Load Default Settings (PnP)], then press
. At
the confirmation message, press
.
3
Close the Setup Utility (
page 34); this screen should ap-
pear.
N O T E
If you have not created these disks, a message will appear at startup urging you to make backup copies. If there is no
message, backup copies have already been created.
Before Reinstallation
Preparing
Important
Save all important data. If reinstallation is carried out, all data existing prior to the installation will be lost. The reinstal-
lation will return the computer to factory condition.
Be sure to remove all PC Cards and disconnect all peripherals before the reinstallation procedure.
R e i n s t a l l i n g
Two options are available, one for beginners and the other
for advanced users.
C A U T I O N
The Advanced Users option should only be performed when
the hard disk has been formatted into two or more parti-
tions.
If data on your hard disk is compressed, the data should
be uncompressed.
Windows 95
(HDD format)
For beginners:
Returning to factory default
condition.
For advanced users:
Returning drive C to factory
default condition.
Power 1
Device Manager 1
1 3
Set [Start drive letter] and [End drive letter] in [Control
Panel] - [System] - [Device Manager]- [CDROM]-
[MATSHITA UJDCD8710]- [Settings] - [Reserved drive
letters] to [L:], then press
If the message to re-
start or shut down Windows appears, select
.
7
When your computer prompts you to insert the "Windows 95
CD", please do so.
Windows 95 has setup started. Follow the on-screen instruc-
tions.