![background image](http://html.mh-extra.com/html/panasonic/cf-55-series/cf-55-series_operating-instructions-manual_264317019.webp)
1 9
Power off your computer
(
page 11)
Do not shut down using the suspend or hibernation mode.
1
Installing/Removing the PC Card
N O T E
Dummy cards are provided at the time of purchase. They provide protection for
the PC card slots against such things as dust.
C A U T I O N
Do not install or remove peripherals while your computer is in the suspend or
hibernation mode; abnormal operation may result.
Before removing a PC card, go to [Socket Status] (in [Start] - [Settings] - [Con-
trol Panel] - [PC Card (PCMCIA)]), select the PC card slot and press [Stop].
2
Simply slide the PC card in until it snaps into place.
Please refer to the manual for each card on how to install the card.
Installing the PC card
Removing the PC card
(or the dummy card)
Back of the card
Slacken here.
N O T E
In case of a PC card with a cable, you can pass the cable through
the hole of the computer. Do not pass a bold cable forcefully.
Turn your computer on
3
C A U T I O N
After you insert a PC Card, a message may appear instructing
you to insert the Windows 95 CD-ROM. If this happens, press
the [Browse] button, then type "c:\windows\options\cabs". If you
have a floppy disk with a driver, insert the disk in the floppy disk
drive, then type "a:".
You may need to install a driver from the Windows 95 CD-ROM (included) or a PC Card's floppy disk. Simply
follow the on-screen instructions and read the PC Card's operation manual on how to install the driver.
N O T E
PhoenixCard Manager:
Follow the installation procedure below only if you will be using the ZV card. Otherwise, do not perform the installation;
abnormal operation may result.
1
Set the items of [Sound Chip] to [Automatic (PnP)] in the Setup Utility.
2
Select [Start] - [Run] and type "c:\util\drivers\pccard\disk1\setup.exe", press
, then follow the on-screen
instructions.
If the computer has been reinstalled, follow the instructions in "Installing PhoenixCard Manager95" on page 29.
After PhoenixCard Manager95 has been installed, make sure to power off the computer before installing or removing the
card. Also, do not use the suspend or hibernation functions if the card is installed.