1 8
Add-ons/Peripherals
Using PC Cards
This computer has two PC Card slots. These slots conform to the PC Card Standard, and
therefore, communications and SCSI devices can be utilized. The slot allows you to use two
Type I or Type II cards (or one Type I and one Type II), or one Type III card.
Back of the card
F r o n t
PC Card Eject Button
Type
I
or Type
II
Card
Type
III
Card
B a c k
F r o n t
B a c k
Type
I
or
II
Type
III
One card can be used only in the
back slot.
Two cards can be used simulta-
neously.
Devices capable of being used by your computer are listed in the table below.
PC Card Slots
below
Serial Port
page 37
RAM Module Slot
page 20
Ext. Display Port
page 21
Parallel Port
page 21
Headphone Jack
page 37
Audio-in Jack
page 37
Microphone Jack
page 37
R e f e r e n c e
W h e r e t o c o n n e c t
D e v i c e ( s )
PC cards (Modem, LAN, SCSI etc.)
Serial Devices (Mouse, Modem etc.)
Extra Memory
External Display
Printer
Speaker/Headphone
Audio device
Microphone
SRAM and FLASH ROM cards (except for ATA interface) are not supported.
When using a CardBus type card, use only that card; do not insert any other PC Cards.
Only the back slot can support a Zoomed Video (ZV) card. When you use a Zoomed
Video card, the driver software is needed.
C A U T I O N
Please check the PC cards’ specifications. Be sure the total operating current does not
exceed the specified limit, damage may result.
Allowable current (total for two slots) : 3.3 V: 400 mA, 5 V: 400 mA, 12 V: 120 mA
There are times when both a Type I card and a Type II card will not work simulta-
neously.
Some PC cards, example shown below, can not be used. The PC card's cable connector
determines its physical compatibility.