background image

21

Software Keyboard

1

Click  

(A).

2

Add a check mark to the function you want to use.

[Auto Move]

 

The software keyboard moves automatically to avoid overlapping the selected window.

[Auto Restore]

 

The software keyboard minimized on the notification area will be restored when you change the input mode. This 
may not work on some applications.

[Always On Top]

 

The software keyboard always appears on the top.

[Transparent]

 

The software keyboard appears semi-transparent.

[Big Size]/[Medium Size]/[Small Size]

 

Select the size of the software keyboard.

[Ten key (Big)]/[Ten key (Medium)]/[Ten key (Small)]

 

Select the size of the numeric keypad.

NOTE

You can change the currency symbol (B) of the numeric keypad.
Click [start] - [Control Panel] - [Date, Time, Language and Regional Options] - [Regional 
and Language Options] - [Regional Options] - [Customize] - [Currency] - [Currency 
symbol].
After changing the currency symbol, click 

 (A), and then change the size of the numeric 

keypad so that the selected currency symbol is shown.

Software Keyboard Menu

Summary of Contents for CF-19CHGACJM - Toughbook 19 Touchscreen PC...



















































































































































Reviews: