manualshive.com logo in svg

Panasonic BT-H1700BMC, Service Manual

The Panasonic BT-H1700BMC Service Manual is a comprehensive guide that provides users with detailed instructions on operating and maintaining their BT-H1700BMC model. Download this manual for free from manualshive.com to access valuable insights and troubleshoot any technical issues you may encounter while using the product.

Share
Download
background image

ELE-57

Adjustment Signal

White Balance HIGH

White Balance LOW

Overscan

Underscan

Overscan

Underscan

COMMON

SR02

–

SR06

–

1080/60i

SI02

SP26

SI06

SP27

1080/50i

SK02

SP32

SK06

SP33

1080/24psF

SL02

SP35

SL06

SP36

720/60p

SM02

SP38

SM06

SP39

720/50p

SN02

SP41

SN06

SP42

BRIGHTNESS ADJUSTMENTS (HDTV)

Measuring Instruments

Signal generator (Gray scale signal)

Card (Slot)

Component/RGB Input Card (Slot 1)

Test Points

Adjustment Points

S*02 (Overscan Bright High), S*06 (Overscan Bright Low),
SP** (Underscan Bright High/Low)
[Service Menu]

Notes:

•

Perform the following adjustments after completing the Contrast and White Balance adjustments.

•

Set the PICTURE SUB ADJ. data in the Setup Menu to 

“

00

”

.

•

The value adjusted at the SR adjustment becomes the reference value for the following adjustments. When this data
is changed, it is required to re-adjust the data of all of the adjustment signals (HDTV, SDTV and NTSC/PAL). When re-
adjusting the 1080/60i signal, use the SI.

•

When overscan data of a signal is changed, it is required to re-adjust the underscan data of the same adjustment
signal.

•

After completing the brightness adjustments, make sure that the Low-Light is not deviated. If it is, it is required to
perform the Low-Light adjustment again.

– Standard value (SO) adjustment –
<White Balance HIGH: D9300>

(1) Apply the 1080/60i component gray scale signal to INPUT A.
(2) Set “COLOR TEMP.” of COLOR TEMP./BAL. in the Setup Menu to HIGH.
(3) Set the PHASE, CHROMA, BRIGHT and CONTRAST potentiometers on the

front panel to the center click positions.

(4) Adjust 

SR02 

in the Service Menu so that the 0% black area in the gray scale

signal lights up slightly. (Be sure to avoid degradation of the black color.)

<White Balance LOW: D65>

(1) Set “COLOR TEMP.” of COLOR TEMP./BAL. in the Setup Menu to LOW.
(2) Adjust 

SR06 

so that the 0% black area in the gray scale signal lights slightly.

(Be sure to avoid degradation of the black color.)

– Other signals adjustments –
<White Balance HIGH: D9300>

(1) Apply the 1080/60i component gray scale signal to INPUT A.
(2) Set “COLOR TEMP.” of COLOR TEMP./BAL. in the Setup Menu to HIGH.
(3) Set the PHASE, CHROMA, BRIGHT and CONTRAST potentiometers on the front panel to the center click positions.
(4) Adjust 

SI02 

in the Service Menu so that the 0% black area in the gray scale signal lights up slightly.

(Be sure to avoid degradation of the black color.)

(5) Set the UNDER SCAN button on the front panel to ON so that the scanning size is underscanning.
(6) Adjust 

SP26 

so that the 0% black area in the gray scale signal lights slightly. (Be sure to avoid degradation of the black color.)

(7) Set the UNDER SCAN button on the front panel to OFF.

<White Balance LOW: D65>

(1) Set “COLOR TEMP.” of COLOR TEMP./BAL. in the Setup Menu to LOW.
(2) Adjust 

SI06 

so that the 0% black area in the gray scale signal lights slightly. (Be sure to avoid degradation of the black color.)

(3) Set the UNDER SCAN button on the front panel to ON so that the scanning size is underscanning.
(4) Adjust 

SP27 

so that the 0% black area in the gray scale signal lights slightly. (Be sure to avoid degradation of the black color.)

(5) Set the UNDER SCAN button on the front panel to OFF.
(6) Vary the adjustment signal and adjustment data, and re-perform adjustments in steps 7 to 18 above (see Table 21).

1.10.12 BRIGHTNESS ADJUSTMENTS

Table 21

0% Black area

0

%

2 4 6 8 10 1214 0

%

2 4 6 8 10 1214

%

Summary of Contents for BT-H1700BMC




























































































































Reviews:

No comments

Related manuals for BT-H1700BMC

iHealth View User Manual preview
View
Brand: iHealth Pages: 12
NEC LCD3215 - MultiSync - 32" LCD Flat Panel... User Manual preview
LCD3215 - MultiSync - 32" LCD Flat Panel...
Brand: NEC Pages: 34
Trane TruSense RMWH Installation, Operation And Maintenance Manual preview
TruSense RMWH
Brand: Trane Pages: 68
Hanns.G HW173DB Specifications preview
HW173DB
Brand: Hanns.G Pages: 1
Barco Nio MKII Installation & User Manual preview
Nio MKII
Brand: Barco Pages: 131
Farenheit T-7004 Instruction Manual preview
T-7004
Brand: Farenheit Pages: 19
GVision C22BD-A6-4000 User Manual preview
C22BD-A6-4000
Brand: GVision Pages: 14
JEA Technologies TPM-193R User Manual preview
TPM-193R
Brand: JEA Technologies Pages: 22
Badger Meter Data Industrial 3100 Series User Manual preview
Data Industrial 3100 Series
Brand: Badger Meter Pages: 32
B&S e-VISION 80 LED User Manual preview
e-VISION 80 LED
Brand: B&S Pages: 30
AOC Q27G2S User Manual preview
Q27G2S
Brand: AOC Pages: 26
AMX i!-EquipmentMonitor Instruction Manual preview
i!-EquipmentMonitor
Brand: AMX Pages: 18
ICP DAS USA iKAN-116-IP65 Quick Start Manual preview
iKAN-116-IP65
Brand: ICP DAS USA Pages: 6
Childcare 143300-003 Manual preview
143300-003
Brand: Childcare Pages: 26
PYLE Audio PLVS7HM Instruction Manual preview
PLVS7HM
Brand: PYLE Audio Pages: 16
Iiyama ProLite TE6568MIS User Manual preview
ProLite TE6568MIS
Brand: Iiyama Pages: 48
Integra Codman ICP Express Manual preview
Codman ICP Express
Brand: Integra Pages: 76
Samsung C32G3 T Series User Manual preview
C32G3 T Series
Brand: Samsung Pages: 29

Brands by name

Popular brands

Load more brands