manualshive.com logo in svg

Panasonic BT-H1700BMC, Service Manual

The Panasonic BT-H1700BMC Service Manual is a comprehensive guide that provides users with detailed instructions on operating and maintaining their BT-H1700BMC model. Download this manual for free from manualshive.com to access valuable insights and troubleshoot any technical issues you may encounter while using the product.

Share
Download
background image

ELE-52

VERTICAL IMAGE POSITION, IMAGE AMPLITUDE AND IMAGE DISTORTION ADJUSTMENTS (NTSC/PAL UNDERSCAN 16:9 MODE)

Measuring Instruments

Signal generator (Mono-scope signal, Crosshatch signal)

Card (Slot)

NTSC/PAL Video Input Card (Slot 2)

Test Points

Adjustment Points

DY** (Vertical Size), DY** (Vertical Position), DY** (Side Pin Distortion), CE** (Corner Distortion
(W)), CE** (Corner Distortion (S)), CE** (Parallelogram Distortion), CE** (Trapezoidal Distortion),
CE** (Horizontal Arc Distortion) [Service Menu]

(1) Apply the NTSC mono-scope signal to INPUT C (Terminal

VIDEO1 on the NTSC/PAL Video Input Card).

(2) Press the ASPECT and UNDER SCAN buttons on the front

panel to set the scanning size to underscanning for the 16:9
ratio.

(3) Set the CONTRAST and BRIGHT potentiometers on the

front panel to the center click positions.

(4) Adjust 

DY05 

in the Service Menu to set the vertical position

of the image at the center of the CRT screen.

(5) Adjust 

DY04 

to set the vertical amplitude of the image to

175mm

.

(6) Apply the NTSC crosshatch signal to INPUT C.
(7) Adjust 

CE08 

to optimize the trapezoidal distortion (observe

the second vertical lines from the left and right edges as the
reference).

(8) Adjust 

CE07 

to optimize the parallelogram distortion (observe

the second vertical lines from the left and right edges as the
reference).

(9) Adjust 

CE09 

to optimize the horizontal arc distortion.

(10) Adjust 

DY06 

so that the second vertical lines from the left

and right edges are linear.

(11) If there is an extreme corner S-shape distortion, adjust 

CE06

to optimize it (this adjustment is usually unnecessary).

(12) If there is an extreme corner W-shape distortion, adjust 

CE05

to optimize it (this adjustment is usually unnecessary).

(13) Apply the NTSC mono-scope signal to INPUT C.
(14) Ensure that the vertical amplitude of the image is 

175mm

. If

it is not, adjust 

DY04 

again.

(15) Adjust 

DY05 

so that the vertical position of the image comes

at the center of the CRT screen.

(16) Vary the adjustment signal and adjustment data, and re-

perform adjustments in steps 1 to 15 above (see Table 17 ).

90

90

80

80

80

175mm

90

Make these lines linear.

Scanning size (100%)

Screen size

Adjustment

Adjustment

Adjustment Data

Step No.

Signal

Vertical

Vertical

Side Pin

Corner

Corner

Parallelogram Trapezoidal

Horizontal

Position

size

Distortion

Distortion (W) Distortion (S)

Distortion

Distortion

 Arc Distortion

1

NTSC

DY05

DY04

DY06

CE05

CE06

CE07

CE08

CE09

2

PAL

DY11

DY10

DY12

CE10

CE11

CE12

CE13

CE14

Table 17

Notes:

•

Perform the following adjustments after completing the Reference Mode (NTSL/PAL overscan 4:3 mode) and NTSC/
PAL underscan 4:3 mode adjustments.

•

The corner distortions (W) & (S), parallelogram distortion, trapezoidal distortion and horizontal arc distortion adjustment
data for this adjustment are common to those in the NTSC/PAL overscan 16:9 mode and the NTSC/PAL underscan
16:9 mode adjustments. This adjustment data needs to be adjusted in either mode.

•

The corner distortions (W) & (S), parallelogram distortion, trapezoidal distortion and horizontal arc distortion adjustment
data for this adjustment are common to those in the 480/60i and NTSC signal or 576/50i and PAL signal adjustments.
This adjustment data needs to be adjusted with either signal.

Summary of Contents for BT-H1700BMC




























































































































Reviews:

No comments

Related manuals for BT-H1700BMC

Samsung SyncMaster S23A550H Manual Del Usuario preview
SyncMaster S23A550H
Brand: Samsung Pages: 61
Vuescape 11009588 Installation And User Manual preview
11009588
Brand: Vuescape Pages: 33
A&A Tech EEM MOT 01 FL02.01 Operator And Maintenance Manual preview
EEM MOT 01 FL02.01
Brand: A&A Tech Pages: 16
F&F FOX ENERGY 3 Mounting Instructions preview
FOX ENERGY 3
Brand: F&F Pages: 16
V-Tec DT27 Series Product Information preview
DT27 Series
Brand: V-Tec Pages: 4
Hanasis HW-9000 User Manual preview
HW-9000
Brand: Hanasis Pages: 4
iHealth BP5S Instructions For Use Manual preview
BP5S
Brand: iHealth Pages: 210
A&A Tech EEM MOT 01 Operator And Maintenance Manual preview
EEM MOT 01
Brand: A&A Tech Pages: 16
Polar Electro WearLink Transmitter Nike+ User Manual preview
WearLink Transmitter Nike+
Brand: Polar Electro Pages: 8
ViewSonic G90FB Specification Sheet preview
G90FB
Brand: ViewSonic Pages: 2
AOC 2019SW1 Manual preview
2019SW1
Brand: AOC Pages: 47
3M 11-81336-225 - MicroTouch M150 High... User Manual preview
11-81336-225 - MicroTouch M150 High...
Brand: 3M Pages: 35
Dakota Digital GRAFIX Installation And Operation Manual preview
GRAFIX
Brand: Dakota Digital Pages: 56
Hyundai P276L Specifications preview
P276L
Brand: Hyundai Pages: 2
Microlife BP B3 Comfort PC Quick Start Manual preview
BP B3 Comfort PC
Brand: Microlife Pages: 90
NEC MultiSync E224F User Manual preview
MultiSync E224F
Brand: NEC Pages: 38
NEC MultiSync EA245WMi-2 User Manual preview
MultiSync EA245WMi-2
Brand: NEC Pages: 30
Johnson Controls NSD1380 Installation Manual preview
NSD1380
Brand: Johnson Controls Pages: 4

Brands by name

Popular brands

Load more brands