![background image](http://html.mh-extra.com/html/panasonic/bm-et500e/bm-et500e_operating-instructions-manual_277447009.webp)
9
INSTALLATIONS AND CONNECTIONS
WARNING
The installation described in these figures should be made
by qualified service personnel or trained system installers.
Cautions:
• This system must be installed within the protected
promise in accordance with the International
Electrotechnical Commission, and the local authorities
having jurisdiction.
• Attach this unit to a flat wall with the supplied mounting
bracket. After the installation, secure the unit to prevent
dropping.
The unit can be mounted over the wall as described.
1. Attach the anchor into the wall, and then attach the sup-
plied mounting bracket to the anchor.
(Refer to the figure in p.12.)
The anchor bolt should meet the standards shown in
the illustration.
2. Remove the shipping lock as follows:
• Take care not to drop the screw inside the unit.
• You can use an M3 screw if you have lost this screw.
3. Remove the numeric keyboard.
You can remove the keys by taking off the two tamper-
proof screws (with the supplied screw driver tool) and
lifting up the keyboard. The control cable should also
be removed.
10 mm (2/5 in.) or less
W
all
Mounting bracket
2 mm (2/25 in.) (D)
1
2
3
(1) Remove the screw.
Belt
Locked
(3) Bend the belt and secure it with the screw.
Unlocked
(2) Insert the belt until it hits
to the stop.
1
2
3
4
5
6
7
8
9
0
ENTER
1
2
3
4
5
CANCEL
CANCEL
Remove the screws.