Using the Maintenance Screen
8
Viewing the Terminal Adaptor List
You can access the master adaptor’s maintenance
screen and view a list of all registered terminal adaptors.
1.
Access the maintenance screen of the desired
adaptor (see page 5).
2.
Click [Option], then click the [Terminal List/Delete]
tab.
• The MAC addresses of all terminal adaptors
registered to the master adaptor are displayed.
• The MAC address is displayed on the bottom of the
adaptor.
Note
• After you have completed adaptor maintenance,
restore the computer’s IP address and network
settings to their original values.
De-registering a Terminal
You can access the master adaptor’s maintenance
screen and delete a terminal adaptor’s registration. We
recommend deleting a terminal adaptor’s registration
when:
– Handing the adaptor over to another party
– Disposing of the adaptor
– The adaptor has been lost
1.
Access the maintenance screen of the desired
adaptor (see page 5).
2.
Click [Option], then click the [Terminal List/Delete]
tab.
• The MAC addresses of all terminal adaptors
registered to the master adaptor are displayed.
• The MAC address is displayed on the bottom of the
adaptor.
3.
Click the checkbox to select the terminal that you
want to de-register, and then click [OK] when
prompted.
• The [Restart] screen is displayed.
4.
Click [Restart].
• The adaptor will restart.
Note
• After you have completed adaptor maintenance,
restore the computer’s IP address and network
settings to their original values.
• After the master has restarted, the de-registered
terminal cannot be used with the master. If you want
to use the terminal again, follow the procedure
described in the Operating Instructions and register
the terminal.
