8
Installation
Placing the adaptors
Refer to the information on page 4 when selecting a location to place your
adaptors.
Note
•
If you have purchased additional adaptors, make sure you have registered
them to the master (see page 7) before placing them where you plan to use
them.
1.
Connect the AC cord of each adaptor to a wall outlet near where you plan to
use it.
2.
Confirm that the
PLC
indicator of each adaptor lights in blue when you plug
the adaptors into the wall outlets.
•
If the
PLC
indicators do not light in blue, see page 13.
After you have placed the adaptors where you plan to use them and plugged them
into the wall outlets, test the terminal’s network speed (see page 10).
BL-PA100A_OI.book Page 8 Thursday, March 16, 2006 4:14 PM
Summary of Contents for BL-PA100A - HD-PLC Ethernet Adaptor
Page 30: ...30 ...
Page 31: ...31 For assistance please call 1 800 272 7033 ...
