17
[For assistance, please call: 1-800-272-7033]
Useful Information
FCC and other information
This equipment has been tested and found to comply with the limit for a Class B
digital device, pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television, reception, which
can be determined by tuning the equipment off and on, the user is encouraged to
try to correct the interference by one or more the following measures:
–
Reorient or relocate the receiving antenna.
–
Increase the separation between the equipment and receiver.
–
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
–
Consult the dealer or an experienced radio/TV technician for help.
CAUTION
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this device.
NOTICE
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1.
This device may not cause harmful interference.
2.
This device must accept any interference received, including interference that
may cause undesired operation.
Responsible Party
Panasonic Corporation of North America
One Panasonic Way, Secaucus, New Jersey 07094
Phone number: 1-800-211-PANA (7262)
Environment
Do not place the unit in a room where the temperature is less than 0° C (32° F) or
greater than 40° C (104° F). Allow 10 cm (4 in.) clearance around the unit for proper
ventilation. Avoid excessive smoke, dust, mechanical vibration, shock, or direct
sunlight.
Routine Care
Wipe the unit with a soft cloth. Do not use benzine, thinner, or any abrasive powder.
When you leave the unit unused for a long period of time, unplug the AC cord from
the outlet.
In the Event of Trouble
Consult an authorized Panasonic Factory Service Center.
BL-PA100A_OI.book Page 17 Thursday, March 16, 2006 4:14 PM
Summary of Contents for BL-PA100A - HD-PLC Ethernet Adaptor
Page 30: ...30 ...
Page 31: ...31 For assistance please call 1 800 272 7033 ...
