Panasonic BL-C30CE, Service Manual

Page: 35 / 144

- When [Do not register with Viewnetcam.com] was selected at step 5,
skip to step 8.
6. The Enter Network Password window is displayed. Enter the user name and password that were set,
and click [OK].
7. After a while, the "Viewnetcam.com FREE DDNS service" website is displayed. Follow the displayed
instructions for registration.
- If the message "Failed to configure the router's Port Forwarding by
UPnP" is displayed, your router may not support UPnP or UPnP is not
enabled. Enable your router's UPnP or set Port Forwarding manually
following the router's manual and try Automatic Setup again. For more
information about setting up a router, refer to the Panasonic Network
Camera support web-site at http://panasonic.co.jp/pcc/products/en/
netwkcam.
- If the message "Failed to register with Viewnetcam.com." is displayed,
con-firm that the router is connected to the Internet.
8. When "Setup complete" is displayed, click [To Single Camera page].
- When [Enable] was selected at step 4.
- When [Disable] was selected at step 4.
35