![background image](http://html.mh-extra.com/html/panasonic/bl-c10a-network-camera-pan/bl-c10a-network-camera-pan_operating-instructions-manual_269874078.webp)
Operating Instructions
78
3.1.6
Resetting the Camera to Factory Default
All camera settings are reset to factory default directly after the Execute button is
clicked.
1.
Click [Reset to Factory Default] on the Maintenance page.
2.
Click [Execute].
•
The indicator blinks orange, and then turns off for 10 seconds.
•
All camera settings (user name, password, IP address, subnet mask etc.)
are reset to factory default.
•
If the camera is reset to factory default, the network connection mode
changes to [Automatic Setup]. Reconfigure the camera seeing the Getting
Started.
Notes
•
The internal clock will not be reset, but the time format will return to AM/
PM mode (see page 35). Set it again.
•
See page 82—page 87 for default settings.
•
Pressing the FACTORY DEFAULT RESET button resets the camera to
the factory default (see page 81).
•
All buffered images are deleted when resetting the camera to factory
default.
•
The reset operation takes about 1 minute.
•
Do not turn off the camera during the reset operation.
Summary of Contents for BL-C10A - Network Camera - Pan
Page 100: ...Operating Instructions 100 ...
Page 101: ...Operating Instructions 101 Index ...