Panasonic BB-HCM381 Operating Instructions Manual Download Page 2

Page: 2 / 48

Operating Instructions (Additional Features)

Trademarks

•

Hotmail is either registered trademarks or trademarks of Microsoft Corporation
in the United States and/or other countries.

•

SD mark is a trademark of the SD Card Association.

•

All other trademarks identified herein are the property of their respective
owners.

•

This software is based in part on the work of the Independent JPEG Group.

Abbreviations

•

"Network Camera" is called "Camera" in this Operating Instructions.

Buffering or Transferring
Images by Motion Detection
Signal

Motion Detection feature that detects
movement, such as people, based on
the preset threshold and sensitivity of
Camera is added.

page 24

Setting the Motion Detection

The sensitivity of the Motion
Detection can be adjusted.

page 35

Notifying Setup of an Alarm Log

Once a day, an alarm log sent at a
specified time can be checked.

page 38

Changing the Time Stamp
Setting

The Time stamp setting is changed
on the Image Display page.

page 40

Format the SD memory card

The format specification is changed.

page 41

Stop the SD Memory Recording

The recording specification is
changed.

page 42

Start the SD Memory Recording

The SD memory recording can be
started on the Trigger page.

page 43

Adding [Alarm Log] on the
Maintenance Window

[Alarm Log] is added on the
Maintenance window.

page 44

Displaying Alarm Logs

Up to 50 Alarm Logs in order of time
are displayed.

page 44

Viewing Still Images on Your
Mobile Phone

Registered preset positions and
alarm logs can be viewed on your
mobile phone.

page 46

Additional Features

Contents

Page

Summary of Contents for BB-HCM381

















































Search results

Summary of Contents for BB-HCM381

Reviews:

Related manuals for BB-HCM381

Brands by name

Popular brands

Panasonic BB-HCM381, Operating Instructions Manual

Search results

Summary of Contents for BB-HCM381

Reviews:

Related manuals for BB-HCM381

Brands by name

Popular brands