Operating Instructions (Additional Features)
13
Buffering or Transferring Images by Alarm Signal
You can buffer the camera images, transfer to an FTP server or send E-mails using
alarm as a trigger.
The Trigger page allows you to enable image buffer/transfer by E-mail or FTP.
1.
Click [Trigger] on the Setup page.
2.
Click
No.
to enable Trigger.
3.
Check [Enable Image Buffer/Transfer], select [Alarm 1 or 2] for trigger, select
[Rising: GND to Open (High).] or [Falling: Open (High) to GND.] and click
[Next>].
Note
•
Click [Delete Buffered Images] to delete this buffered images.
•
Click [Save] to save the settings.
•
Clicking [Cancel] takes you back to the Trigger page without saving
changes.
