![background image](http://html.mh-extra.com/html/panasonic/bb-hcm371a-outdoor-wireless-network-camera/bb-hcm371a-outdoor-wireless-network-camera_installation-troubleshooting-manual_277321026.webp)
Installation/Troubleshooting
26
1.7
Confirming the Wireless LAN Setup
After setting each item for the wireless LAN, confirm that the camera works
correctly.
1.
Turn off the power.
2.
Disconnect the Ethernet cable.
3.
Turn on the power
•
Confirm that the indicator lights green.
Note
If the indicator does not light green, the radio waves may not be reaching the
camera. Put the camera near the wireless router. Or the SSID or the WEP key
may be different from those for the wireless router.
4.
Start up the web browser on the PC.
5.
Enter "http://IP address (or URL):Port No." in the address field and press
[Enter].
(When port number is 80 (default), you do not need to enter port number.)
6.
When the following Top Page is displayed, the wireless LAN setup is
successful.
•
If the Top Page was not displayed, the settings for the camera are not
identical with those for the router. Check the settings by using wired
connection.
If the settings are correct and you use a proxy server, set the web browser
not to access the proxy server.
If the Top Page is not displayed even after trying these methods, contact
the retailer.
•
It takes about 1 minute for the new settings to be effective.
•
It is not possible to access the camera simultaneously by both wired and
wireless connection.
•
Some wireless routers need to be restarted.