manualshive.com logo in svg

Panasonic BB-HCM311, Operating Instructions Manual

Share
Download
Panasonic BB-HCM311 Operating Instructions Manual Download Page 87

Operating Instructions

87

3.

Click [Save] when finished.

•

New settings are saved.

•

When finished, "Success!" is displayed.

4.

Click [Go to Audio page].

•

The Audio page is displayed.

Setting

Description

Output

•

It controls audio output for external speaker connected to 
the camera.

Volume

•

It controls the volume to output to external speaker.
Minimum: Turn down the volume
Standard: Standard setting (default)

Maximum: Turn up the volume

PC Audio Input 
Timeout 

•

You can set the length of time to receive the audio from 
your PC.

•

The following settings are available.

1 min, 2 min, 3 min, 5 min, 10 min, 20 min, 30 min, 60 min

Input

•

It controls audio input from the built-in microphone or 
external microphone.

Camera 
Microphone 
Sensitivity

•

You can select the built-in microphone or external 
microphone sensitivity.

Minimum: Decreased sensitivity
Standard: Standard setting (default)
Maximum: Enhanced sensitivity

Mute during Pan/Tilt •

You can temporarily stop listening (audio input) when the 
camera pans or tilts. 

Summary of Contents for BB-HCM311

































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands