manualshive.com logo in svg

Panasonic BB-HCM311, Operating Instructions Manual

Share
Download
Panasonic BB-HCM311 Operating Instructions Manual Download Page 139

Operating Instructions

139

2.25 Stop the SD Memory Recording

After you stop the SD memory recording, remove the SD memory card.

Note

•

You can confirm the SD memory capacity on the Status page (see page 
146).

•

If the camera is restarted (see page 148), the SD memory recording starts 
again.

•

If you remove the SD memory card and insert it again, the SD memory 
recording starts again (see page 157).

1.

Click [Trigger] on the Setup page.

2.

Click [SD video recording stop].

3.

Click [OK] on the confirmation window.

•

The SD memory recording is stopped.

4.

Click [Go to Trigger page].

•

The Trigger page is displayed.

Note

Ensure that recording has stopped before removing the SD memory card. Do 
not remove the SD memory card, nor restart or turn off the camera while 
recording images on the card. Doing so can cause a decrease in SD memory 
card capacity, data corruption or camera malfunction.

Summary of Contents for BB-HCM311

































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands