manualshive.com logo in svg

Panasonic BB-HCM311, Operating Instructions Manual

Share
Download
Panasonic BB-HCM311 Operating Instructions Manual Download Page 37

Operating Instructions

37

Changing or Deleting the Settings

1.

Click [Program].

•

[Program] switches to [Cancel]. 
Click [Cancel] to quit without saving 
changes.

2.

Pan and tilt the camera to a desired 
position.
•

When deleting, this step is not 
necessary.

3.

Click the home position, alarm position 
or a preset position (1—20).

Note

All the items can be selected from drop-
down list. It is also possible to set 
positions 1 to 8 as preset buttons.

4.

Click [Save] after setting the preset 
name or click [Delete].
•

If you quit to change or delete 
settings, click [Back], and then 
[Cancel].

•

If "Success!" is displayed, click 
[Back].

Note

The home position or the alarm position 
cannot be deleted, and these position 
names cannot be changed either.

Pan/Tilt

Changing 
the name

The preset 
number and 
preset name 
disappear.

Home Position, 
Alarm Position 
and Preset 
Position

Only buttons 
1 to 8 are 
displayed.

Preset 
number

The deleted 
button turns 
white.

Home 
Position

Summary of Contents for BB-HCM311

































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands