![background image](http://html.mh-extra.com/html/panasonic/bb-hce481a-network-camera/bb-hce481a-network-camera_troubleshooting-manual_273648009.webp)
Troubleshooting
9
Camera Image/Page Display Troubleshooting
Problem
Cause and Remedy
The camera
cannot be
accessed.
• The camera IP address has changed.
→
Enter the correct IP address in the address bar of the web
browser.
• An IPv6 address was entered in the address bar of Internet
Explorer.
→
Internet Explorer does not support IPv6 addresses. Use a
DynamicDNS service such as the Viewnetcam.com
service.
• The default gateway or DNS server addresses may be wrong.
The correct IP addresses are required especially when you
are using the Viewnetcam.com service.
→
Assign the correct default gateway and DNS server
addresses (see page 48 or page 53 of the Operating
Instructions on the CD-ROM).
• The connection type is wrong (see page 48 or page 53 of the
Operating Instructions on the CD-ROM).
→
If the camera does not connect to the network using the
[Auto Negotiation] setting, set up the camera and the
router referring to the following table.
Auto Negotiation
Network Camera
Router or hub
Auto
Negotiation
100Base-TX
10Base-TX
Full
Duplex
Half
Duplex
Full
Duplex
Half
Duplex
100Base-
TX
10Base-T
Full Duplex
Half Duplex
Full Duplex
Half Duplex
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—