6
Making image adjustments for the selected remote camera
The following settings and adjustments can be made for the selected remote camera directly from this unit.
z
Gain
z
Pedestal
z
R and B gain
z
R and B pedestal
z
White balance
z
Black balance
z
Color bar selection
z
Detail
z
Shutter speed
z
Shooting mode selection
The dedicated buttons and dials in the color adjustment section can be used for the gain, pedestal, R and B gain, R and B pedestal, white balance,
black balance, color bar selection, and detail operations.
<Color adjustment section>
PED dial
R GAIN dial
B GAIN dial
R PED dial
B PED dial
BARS button
ABB button
Color adjustment ENABLE button
ATW button
AWB button
WHITE BAL A button
WHITE BAL B button
DETAIL button
GAIN button
AUTO GAIN button
z
When the color adjustment ENABLE button indicator is off, operation of the color adjustment section is disabled. Press the button to turn on its
indicator and then perform operation.
z
The setting values of the gain, pedestal, R and B gain, R and B pedestal, detail, and shutter speed differ depending on the remote camera connected.
For the setting value ranges of each remote camera, refer to “Table of setting items (menus)” (pages 53 to 54).
z
Operation differs as follows when controlling AW-HE60 and AW-HE50.
• During auto iris (when the auto iris button indicator is on), the shutter speed is adjusted automatically. The shutter speed value set from the unit is
not immediately reflected for the camera output images at that time but instead is reflected when manual iris (when the auto iris indicator turns off) is
set.
• While the shooting mode is set to “FullAuto”, the following occurs.
· Auto gain mode is fixed and the gain setting value cannot be changed from “AUTO”.
· ATW mode is fixed and the R and B gain setting values cannot be changed.
· Auto iris is fixed and the shutter speed setting value cannot be changed.
