34
TALLY IP function
Enable TALLY IP to receive OA tally information from the switcher via
the network .
The lighting statuses of the camera status indicators on the unit and the
tally lamps on the remote cameras are changed based on the received
OA tally information .
Enabling or disabling the TALLY IP function
1 .
Press the MENU button .
2 .
Open SW FUNCTION menu [42] .
3 .
Turn the F1 dial to display the “6 . TALLY_IP” item .
6.TALLY_IP
Off
4 .
Turn the F2 dial to select “On” or “Off”, and then press
the F2 dial to confirm the selection .
On :
Enables the TALLY IP function .
Off :
Disables the TALLY IP function .
z
z
To enable tally lamp on instructions to be sent to a remote camera
based on the tally information received from the switcher, you need to
display the “4 . TALLY OUT” item in CAMERA SETUP menu [24] and
then set it to “On” .
z
z
The unit also sends the tally lamp on instruction to the
corresponding remote camera when the unit receives tally
information for a camera number belonging to a camera group
that is not selected .
Note
Operating the switcher with the PAN/TILT
lever and ZOOM button
You can use the unit’s PAN/TILT lever and ZOOM button to change
switcher settings (PinP position and size, etc .) .
Setting the application of the PAN/TILT lever and
ZOOM button
1 .
Press the MENU button .
2 .
Open SW FUNCTION menu [42] .
3 .
Turn the F1 dial to display the “7 . P/T/Z CONTROL” item .
7.P/T/Z CONTROL
CAM
4 .
Turn the F2 dial to select a setting, and then press the
F2 dial to confirm the selection .
CAM:
Allows you to operate the remote camera selected on the unit with
the PAN/TILT lever and ZOOM button .
SW:
Allows you to change the switcher settings with the PAN/TILT lever
and ZOOM button .
Button Select:
Allows you to select the operation target of the PAN/TILT lever and
ZOOM button (remote cameras or switcher) by pressing the PAN/
TILT ENABLE button or FOCUS/ZOOM/IRIS ENABLE button .
For each of the setting values above, the lighting state of the button
indicator changes as follows when the PAN/TILT ENABLE button or
FOCUS/ZOOM/IRIS ENABLE button is pressed .
<Change of lighting state when each ENABLE button is pressed>
Setting value
Lighting state
CAM
On
Off
SW
Blinking
Off
Button Select
On
Blinking
Off
The following shows the operation with respect to the lighting state of
each ENABLE button .
<PAN/TILT ENABLE button>
Button indicator
state
Operation when the PAN/TILT lever is operated
On
The remote camera is able to move horizontally
and vertically .
Blinking
The operation is as follows depending on the state
of the switcher .
z
z
When Wipe Menu is open
The transition start position (X, Y) can be moved
horizontally and vertically .
z
z
When PinP Menu is open
The PinP position (X, Y) can be moved
horizontally and vertically .
z
z
When a chroma key marker is superimposed on
the image output
The chroma key marker position (X, Y) can be
moved horizontally and vertically .
Off
Operation is disabled .
<FOCUS/ZOOM/IRIS ENABLE button>
Button indicator
state
Operation when the ZOOM button is operated
On
The lens zoom of the remote camera can be
changed .
Blinking
The operation is as follows depending on the state
of the switcher .
z
z
When PinP Menu is open
The PinP size can be changed .
z
z
When a chroma key marker is superimposed on
the image output
The chroma key marker size can be changed .
Off
Operation is disabled .
Setting the functions for when the unit is linked with the switcher
(continued)
