28
Configuring the unit operation settings
(continued)
Enabling or disabling operation of the
ENABLE buttons by menu operation
Operation of the ENABLE buttons can be enabled or disabled by menu
operation .
Disabling operation prevents erroneous operation because the enable/
disable states become unable to be changed even by pressing the
ENABLE buttons .
1 .
Press the MENU button .
2 .
Open RP SETUP menu [25] .
3 .
Turn the F1 dial to display the “4 . ENABLE BUTTON”
item .
4.ENABLE BUTTON
ACTIVE
4 .
Turn the F2 dial to select “ACTIVE” or “LOCK”, and then
press the F2 dial to confirm the selection .
ACTIVE:
Enables operation of the ENABLE buttons .
LOCK :
Disables operation of the ENABLE buttons .
z
z
Setting this to “LOCK” retains the ENABLE button
states (operation is enabled or disabled in accordance
with the lighting states), but ENABLE button operation
has no effect .
z
z
Connecting an external device to the TALLY/GPI connector (GPI
input: GPI IN 5) on the rear panel enables the “4 . ENABLE BUTTON”
item to be controlled from the external device .
Each time GPI IN 5 is set to On (30 ms or longer), the setting of the
“4 . ENABLE BUTTON” item switches between “ACTIVE” and “LOCK” .
Enabling or disabling menu operation
Menu operation can be enabled or disabled .
Disabling MENU operation
1 .
Press the MENU button .
2 .
Open RP SETUP menu [25] .
3 .
Turn the F1 dial to display the “5 . MENU CONTROL”
item .
4 .
Turn the F2 dial to select “LOCK”, and then press the F2
dial to confirm the selection .
5.MENU CONTROL
LOCK
5.MENU CONTROL
LOCK
Menu operation is disabled .
If a number button with a menu assigned is pressed, “LOCKED!”
appears on the LCD panel and the menu does not open .
z
Memory (preset memory and tracing memory) operation is still
possible even when menu operation is disabled .
Enabling MENU operation
1 .
Press the MENU button .
The following appears on the LCD panel .
5.MENU CONTROL
LOCK
2 .
Turn the F2 dial to select “ACTIVE”, and then press the
F2 dial to confirm the selection .
Menu operation is enabled .
5.MENU CONTROL
ACTIVE
z
z
Connecting an external device to the TALLY/GPI connector (GPI
input: GPI IN 6) on the rear panel enables the “5 . MENU CONTROL”
item to be controlled from the external device .
Each time GPI IN 6 is set to On (30 ms or longer), the setting of the
“5 . MENU CONTROL” item switches between “ACTIVE” and “LOCK” .
