33
Specifications
Genlock input:
BNC
Black burst or composite video signal, Tri Sync
Prompter input
(PROMPTER
IN):
BNC
Through output to PROMPTER connector
Prompter output
(PROMPTER
OUT):
D-SUB
15-pin
Camera video output
VIDEO:
BNC, 75-ohm output
Y:
BNC, 75-ohm output
Pr/C:
BNC, 75-ohm output
Pb:
BNC, 75-ohm output
SDI:
BNC
AUX:
BNC
Camera, pan-tilt head control:
RJ45, RS-422, pan-tilt head control signal output
RP
Connecting cable: 10BASE-T straight cable (equivalent to UTP category 5),
max. 1000 meters (3281 ft)
Functions/performance:
Maximum load: 15 kg (33.1 lbs)
p
In the event that the drop-prevention wire provided with the pan-tilt head is used to
prevent dropping, the maximum load when the pan-tilt head is used in combination with
the camera and lens is 5 kg (11 lbs) or less. If the load exerted by the units to be installed
exceeds 5 kg (11 lbs), measures to sufficiently withstand this load must be taken to
prevent the units from dropping.
Tilt range: 300 ° (approx. ±150 °)
The tilt range is subject to restrictions depending on the cable and lens of camera to be
mounted on pan-tilt head.
Pan range: 300 ° (approx. ±150 °)
Maximum operating speed: 45 °/s
( when the center of gravity of the units installed on the pan-tilt head has been aligned with
the head’s center of rotation)
(Maximum operating speed with prompter mounted: 15 °/s)
Stop accuracy: ±3´
Noise level: Less than NC35 (at less than 30 °/s)
Ambient operating temperature:
–5 °C to +45 °C (23 °F to 113 °F)
Storage temperature:
–20 °C to +65 °C (–4 °F to 149 °F)
Ambient operating humidity:
30 % to 90 % (no condensation)
Dimensions (W
V
H
V
D):
319
M
416
M
168 mm (12-9/16˝
M
16-3/8˝
M
6-5/8˝ ) (excluding protrusions)
Mass (weight):
Approx. 10 kg (22 lbs)
Finish:
AV ivory paint (color resembling Munsell 7.9Y6.8/0.8)
Mass (weight) and Dimensions indicated above are approximate.
Specifications are subject to change without notice.
Supply voltage:
AC 120 V, 60 Hz
Power consumption:
120 W
indicates safety information.
