21
Installation
(Be sure to ask your dealer to install the unit.)
<When using anchors with an internal thread>
For a stand-alone installation
For installation on the ceiling
Hexagon head bolt (M6)
(long bolt)
Secure the underneath support
plate by tightening bolt.
Spring washer
Flat washer
Hexagon head bolt (M6)
(short bolt)
The anchors must always
be installed.
The anchors must always
be installed.
Secure the underneath
support plate by
tightening bolt.
Notes
p
Use a torque wrench whose torque can be specified
to tighten the hexagon head bolts at the torque levels
listed in the table on the right.
After tightening the bolts, check for play.
Installing the
pan-tilt head
Clamping torque
Hexagon head bolts (M6)
5.0 N
•
m (50 kgf•cm)
Hexagon head bolt (M8)
12.0 N
•
m (120 kgf•cm)
p
When installing the pan-tilt head, do not forcibly turn the “rotary head” or “rotary arm” manually. Doing so may
result in malfunctioning.
