5
Parts and their functions
4
5
6
:
8 9
;
@
?
A
C
B
<
=
1
3
7
>
2
1
Rotary head
This rotates in the panning direction.
2
Pedestal
3
Rotary arm
The ENG camera is mounted on this arm. The arm
rotates in the tilting direction.
4
Grip
This is where the pan/tilt head is held. Use it to carry the
pan/tilt head from one place to another or pick it up when
installing it.
5
Tally lamp
This is lit by the tally ON signal of the hybrid controller or
other device. For further details, refer to the operating
instructions of the controller.
6
Rotary arm anchoring screws (supplied)
These hexagon head bolts (
a
8) are used to anchor the
rotary arm.
7
Holes for attaching the pan/tilt head
These holes are used for anchoring the pan/tilt head
when it is installed.
8
Lens I/F connector (12-pin round)
This connector is used to control the zooming and
focusing of the motorized lens unit.
9
ND/EXT CONTROL connector
This output connector is used to perform ON/OFF control
for the motorized ND filter, the ND filter of a lens with a
built-in motorized extender and the lens extender. The
connector has contact outputs. The R03-P6M or R03-
PB6M connector made by Tajimi Electronics Co., Ltd. is
compatible.
A :
ND signal
B :
ND return
C :
EXT signal
D :
EXT return
E :
GND
F :
VCC (+15 V)
A
F
B
E
C
D
Summary of Contents for AW-PH500p
Page 19: ...19 ...
