Panasonic AW-PH500p, Operating Instructions Manual

Page: 17 / 20

17
Specifications
Power supply : DC 12 V
Power consumption : 54 W at DC 12 V (camera power included)
DC 12 V 2.5 A (pan-tilt head only)
GENERAL
Dimensions (W
a a
H
a a
D): 10-15/16˝
a
25-1/16˝
a
12-1/2˝ (252
a
636
a
317 mm)
Weight: 34.76 lbs (15.8 kg)
Allowable operating temperature: 14 F to 113 F (–10
o
C to + 45
o
C)
Allowable operating humidity: Max. 90%
Finish: Paint with a color approximating Munsell N3.5
INPUT/OUTPUT CONNECTORS
VIDEO IN: BNC connector
a
1 (connected to camera)
G/L OUT: BNC connector
a
1 (connected to camera)
CAMERA CONTROL: BNC connector
a
1 (connected to camera)
≥
The AW-F575 is the camera which can be connected.
COMPONENT IN: D-sub 9-pin connector
a
1 (connected to camera)
DC OUT: 4-pin Cannon connector
a
1
ND/EXT: 6-pin round connector
a
1
For controlling ND filter of motorized lens unit, lens extender
LENS IF: 12-pin round connector
a
1
For controlling zooming and focusing of motorized lens unit
(Connection of zoom/focus cable of lens)
G/L IN: 16-pin multi-connector
a
1
(75
≠
, 1 V [p-p], VBS or BBS, connected to control panel)
Extension up to 500 meters enabled by 5C-2C coaxial cable
VIDEO OUT: 16-pin multi-connector
a
1
(75
≠
, 1 V [p-p], VBS, connected to control panel)
Extension up to 500 meters enabled by 5C-2C coaxial cable
CAMERA CONTROL IN: 16-pin multi-connector
a
1 (Connected to control panel)
* This works only when the AW-F575 is the camera used.
Extension up to 500 meters enabled by 5C-2C coaxial cable
P/T CONTROL IN (SERIAL): 24-pin multi-connector
a
1 (Connected to control panel)
Extension up to 500 meters enabled by 10 BaseT straight cable
(UTP category 5)
P/T CONTROL IN (RS-232C): 24-pin multi-connector
a
1
Used for PC control (RS-232C)
DC 12 V IN: 4-pin Cannon connectors
a
2
(Connected to AW-PS505)
FUNCTIONS/PERFORMANCE
Up/down angle of rotation: 190 degrees (approx.
d
95 degrees)
Horizontal angle of rotation: 300 degrees (approx.
d
150 degrees)
Maximum weight supported: 33 lbs (15 kg)
Noise level: Less than NC35
indicates safety information.