background image

45

Operating Instructions

Bitte lesen Sie zuerst diesen Hinweis!  

(Für AW-HE42WE, AW-HE42KE)

 ist die Sicherheitsinformation.

WARNUNG:

•   Zur Reduzierung der Gefahr von Brand und 

elektrischem Schlag dieses Gerät weder Nässe 
noch Feuchtigkeit aussetzen.

•   Um Brand- oder Stromschlaggefahr zu reduzieren, 

muss dieses Gerät von allen Flüssigkeiten 
ferngehalten werden. Vermeiden sie Gebrauch 
und Lagerung des Gerätes an Orten, an denen 
die Gefahr besteht, dass es mit Flüssigkeiten 
betropft oder bespritzt wird, und stellen sie keine 
Flüssigkeitsbehälter auf das Gerät.

WARNUNG:

Halten Sie Speicherkarten (optionales Zubehör) und 
Zubehörteile (Befestigungsschrauben) stets fern von 
Babys und Kleinkindern.

WARNUNG:

Dieses Gerät ist mit der Klasse A von CISPR32 
kompatibel.
In einer Wohngegend kann dieses Gerät 
Funkstörungen verursachen.

VORSICHT:

Ein unbehinderter Zugang zum Netzstecker des 
Netzkabels muss jederzeit gewährleistet sein.
Die Steckdose (Netzsteckdose) sollte in der Nähe 
des Gerätes installiert werden und leicht zugänglich 
sein. Zur vollständigen Trennung dieses Gerätes vom 
Netz ziehen sie den Netzstecker aus der Steckdose.

VORSICHT:

Um eine ausreichende Belüftung zu gewährleisten, 
dieses Gerät nicht in einem Bücherregal, 
Einbauschrank oder an einem anderen engen 
Platz aufstellen. Sicherstellen, dass die 
Ventilationsöffnungen im Gehäuse nicht durch 
Vorhänge oder andere Materialien blockiert werden; 
anderenfalls besteht die Gefahr von elektrischem 
Schlag oder Feuer aufgrund von Überhitzung.

VORSICHT:

Nur das empfohlene Zubehör verwenden, um die 
Gefahr von Feuer und elektrischem Schlag sowie 
Störungen auszuschalten.

VORSICHT:

Die Installation ist mindestens einmal jährlich zu 
überprüfen.
Bei fehlerhafter Installation besteht Verletzungsgefahr 
durch Herunterfallen des Gerätes.

VORSICHT:

Unterlassen Sie das Aufheben und Transportieren 
des Gerätes bei angebrachtem Stativ.
Die Fassung kann unter dem Gewicht des Stativs 
brechen, was zu einer Verletzung führen kann.

VORSICHT:

Im Inneren des Geräts befindet sich eine 
Knopfbatterie.
Setzen Sie das Gerät keiner großen Hitze aus, wie 
beispielsweise direktem Sonnenlicht oder Feuer.

VORSICHT:

Öffnen Sie nicht das Gerät durch Abschrauben von 
Gehäuseteilen.
Zur Vermeidung von elektrischem Schlag darf das 
Gehäuse nicht geöffnet werden. Im Geräteinneren 
befinden sich keine Teile, die vom Benutzer gewartet 
werden können.
Wartungs- und Reparaturarbeiten grundsätzlich 
autorisiertem Kundendienstpersonal überlassen.

DEUTSCH

Summary of Contents for AW-HE42WP













































































Reviews: