Panasonic AW-HE100E, Operating Instructions Manual

Page: 60 / 400

59 (E)
Safe modes

Concerning the safe modes
This unit comes with two safe modes which are designed to safeguard the user and others from injury and to prevent damage to
the unit.
When a safe mode is established, some or all of operations will no longer be accepted.
1
Collision-triggered safe mode
When the unit collides with a person or obstacle during panning or tilting, the “Collision-triggered safe mode” is established,
and all further panning or tilting in the direction of the collision is suspended.
To release the “Collision-triggered safe mode”, return the panning or tilting to a neutral position.
2
Trouble-triggered safe mode
When trouble has occurred inside the unit, the “Trouble-triggered safe mode” is established, the unit’s functions are shut
down, and the status display lamp lights up red.
To release the “Trouble-triggered safe mode”, first place the unit in the standby mode, turn its power off and then turn it
back on. (If internal trouble is identified again, the “Trouble-triggered safe mode” will be established again.)

The output of pictures might be suspended when the unit collides with a person or obstacle
and the safe mode is established.
In this case, the output of pictures will be restarted about 5 to 10 seconds later.
Note