background image

 (E)

 indicates safety information.

This  class  A  digital  apparatus  complies 
with Canadian ICES-003.
Cet  appareil  numérique  de  la  classe  A 
est  conforme  à  la  norme  NMB-003  du 
Canada.

For CANADA

Safety precautions

CAUTION

RISK OF ELECTRIC SHOCK

 DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, 

DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL.

The  lightning  flash  with  arrowhead 
symbol,  within  an  equilateral  triangle,  is 
intended to alert the user to the presence 
of uninsulated “dangerous voltage” within 
the  product’s  enclosure  that  may  be  of 
sufficient magnitude to constitute a risk of 
electric shock to persons.
The exclamation point within an equilateral 
triangle  is  intended  to  alert  the  user  to 
the  presence  of  important  operating  and 
maintenance  (service)  instructions  in  the 
literature accompanying the appliance.

WARNING:

•  TO  REDUCE  THE  RISK  OF  FIRE  OR 

ELECTRIC  SHOCK,  DO  NOT  EXPOSE THIS 
APPARATUS TO RAIN OR MOISTURE. 

•  THE APPARATUS SHALL NOT BE EXPOSED 

TO  DRIPPING  OR  SPLASHING  AND  THAT 
NO  OBJECTS  FILLED WITH  LIQUIDS,  SUCH 
AS  VASES,  SHALL  BE  PLACED  ON  THE 
APPARATUS.

CAUTION:

TO  REDUCE THE  RISK  OF  FIRE  OR  SHOCK 
HAZARD  AND  ANNOYING  INTERFERENCE, 
USE  THE  RECOMMENDED  ACCESSORIES 
ONLY.

FCC Note:
This  equipment  has  been  tested  and  found 
to  comply  with  the  limits  for  a  class  A  digital 
device,  pursuant  to  Part  5  of  the  FCC  Rules.  
These  limits  are  designed  to  provide  reasonable 
protection  against  harmful  interference  when 
the  equipment  is  operated  in  a  commercial 
environment.    This  equipment  generates,  uses, 
and  can  radiate  radio  frequency  energy,  and 
if  not  installed  and  used  in  accordance  with 
the  instruction  manual,  may  cause  harmful 
interference  to  radio  communications.    Operation 
of  this  equipment in  a  residential area  is likely  to 
cause harmful interference in which case the user 
will  be  required  to  correct  the  interference  at  his 
own expense.

Warning:
To  assure  continued  FCC  emission  limit 
compliance,  the  user  must  use  only  shielded 
interface cables when connecting to external units.  
Also,  any  unauthorized  changes  or  modifications 
to this equipment could void the user’s authority to 
operate it.

CAUTION:

TO  REDUCE  THE  RISK  OF  FIRE  OR  SHOCK 
HAZARD,  REFER  CHANGES  OF  SWITCH 
SETTINGS  INSIDE  THE  UNIT  TO  QUALIFIED 
SERVICE PERSONNEL.

ENGLISH VERSION

Summary of Contents for AVHSB300G - HD ANALOG BOARD










Reviews: