Panasonic AVCCAM AG-HMC81 Operating Instructions Manual Download

Page: 105 / 125

105

Chapter 3: Screen displays and setting menus

PLAY SETUP screen

Item

Display

mode

Description of settings

REPEAT PLAY PB

When set to ON, supported clips are played repeatedly.

ON OFF

RESUME PLAY PB

When set to ON, playback resumes from the video position at which clip playback

stopped.

ON OFF

OPERATION screen (AVCHD mode only)

Item

Display

mode

Description of settings

CLIP PROTECT PB

Protects clips to prevent accidental deletion.

YES:

Enables clip protection or cancels protection.

Executing a format of the memory card will delete all clips even if they are

protected.

•

DELETE

Deletes clips.

ALL CLIPS:

Deletes all clips.

SELECT:

Deletes only the selected clips. Press the FUNC/EXEC button to

execute.

Clips for which CLIP PROTECT is specified are not deleted.

•

PHOTO SETUP screen (AVCHD mode only)

Item

Display

mode

Description of settings

SCENE

PROTECT

Protects photos to prevent accidental deletion.

YES:

Enables photo protection or cancels protection.

Executing a format of the memory will delete photos even if they are protected.

•

DPOF SET

Allows you to write data related to the print quantity of a photo onto the SD

Memory Card.

CANCEL ALL:

Cancels all quantity settings.

SET:

Sets the print quantity.

DELETE

Deletes photos.

ALL SCENES:

Deletes all photos.

SELECT:

Deletes only the selected photos. Press the FUNC/EXEC

button to execute.

Photos for which SCENE PROTECT is specified are not deleted.

•

indicates the factory setting.

Summary of Contents for AVCCAM AG-HMC81






























































































































Search results

Summary of Contents for AVCCAM AG-HMC81

Reviews:

Related manuals for AVCCAM AG-HMC81

Brands by name

Popular brands

Panasonic AVCCAM AG-HMC81, Operating Instructions Manual

Search results

Summary of Contents for AVCCAM AG-HMC81

Reviews:

Related manuals for AVCCAM AG-HMC81

Brands by name

Popular brands