117
Playback
Cannot hear any sound
from the camera-recorder’s
speaker.
You may have turned down the camera-recorder’s volume control
too far.
Adjust the sound volume with the MONITOR LEVEL knob.
•
Page 21
of Vol.1
PC connection
Computer does not
recognize camera when
USB connection cable is
connected.
Check that the camera is in AVCHD mode.
If your computer has multiple USB terminals, please try connecting
the camera to a different USB terminal.
Switch the camera’s power off and back on again, and reconnect
the USB connection cable.
•
•
•
Page 51
An error message appears
on the computer when the
USB connection cable is
disconnected.
To disconnect the USB connection cable safely, double-click the
icon in the task tray, and follow the instructions on the screen.
•
—
Other
The remote control does
not work.
The battery in the remote control may have run out.
If the remote control fails to work even if it is operated close to the
remote control sensor of the camera-recorder, it means that the
battery has run out. Replace it with new one.
Check that the IR REMOTE item in the setting menu OTHER
FUNCTIONS screen is not set to OFF.
•
•
Page 29
of Vol.1
There is a rattling sound
when the camera-recorder
is tilted back and forth.
This is the sound of the lens moving. This is not a fault. No sound
should be heard when the camera’s power is switched on.
•
—
This initialization operation is performed when the camera starts up.
It occurs due to the construction of the camera and is not indicative
of any trouble.
•
—
The SD Memory Card
screen appears strange.
The data on the card could be corrupted. Data can be corrupted by
static electricity and electromagnetic waves. Please always save
important data to a computer or other storage media.
•
—
The SD Memory Card
cannot be used even after
formatting.
There could be a fault with the camera or with the SD Memory
Card. Please consult the place of purchase. Always use only SD
Memory Cards of 512 MB - 32 GB with this camera.
•
—
The camera does not
recognize the SD Memory
Card even though it is
inserted correctly.
Was the inserted SD Memory Card originally formatted with a
computer? Always use this camera to format SD Memory Cards.
Please be aware that, when an SD Memory Card is formatted, all
data recorded on the card will be erased and will not be restorable.
•
Pages
28, 76
The SD Memory Card is not
recognized when inserted
into other devices.
Please check that the device is compatible with the capacity or type
(SD Memory Card/SDHC Memory Card) of the SD Memory Card
that you are using.
For details, please consult the device’s own operating instructions.
•
Page 14
of Vol.1
USO
RESTRITO
