background image

E-37

Basic shooting operations (continued)

SD Memory Card recording times

Total available recording times (approx.) when using SD/SDHC/SDXC Memory Cards manufactured by 
Panasonic

SD Memory Card 

capacity

Recording mode

PH

*

1

(Highest quality mode

*

3

1920 × 1080 pixels or 1280 × 

720 pixels)

HA

*

1

(High quality mode/  

1920 × 1080 pixels)

HE

*

2

 (Long duration mode/ 

1440 × 1080 pixels)

512 MB

Approx.  2 min

Approx.  3 min

Approx.  10 min

1 GB

Approx.  5 min

Approx.  7 min

Approx.  21 min

2 GB

Approx.  10 min

Approx.  15 min

Approx.  45 min

4 GB

Approx.  21 min

Approx.  30 min

Approx.  90 min

6 GB

Approx.   33 min

Approx.  45 min

Approx. 135 min

8 GB

Approx.  45 min

Approx.  60 min

Approx. 180 min

12 GB

Approx.  65 min

Approx.  90 min

Approx. 270 min

16 GB

Approx.  90 min

Approx. 120 min

Approx. 360 min

32 GB

Approx. 180 min

Approx. 240 min

Approx. 720 min

48 GB

Approx. 270 min

Approx. 360 min

Approx. 1080 min

64 GB

Approx. 360 min

Approx. 480 min

Approx. 1440 min

*

1

   Use an SD memory class of SD speed class 4 or above when recording on PH mode or HA mode. 

Recording cannot be completed on SD Memory Cards of lower speed classes.

*

2

   Use an SD memory class of SD speed class 2 or above when recording in HG mode or HE mode. 

Recording cannot be completed on SD Memory Cards of lower speed classes.

*

3

   

This is the highest quality mode of this camera.

This camera uses the VBR recording system. “VBR” stands for Variable Bit Rate, and it refers to a system in 

• 

which the bit rate (volume of data per given time period) varies automatically depending on the subject which is 
being shot. This means that the recording times will be shorter when fast-moving subjects have been recorded.
Times displayed include time needed for processing, etc. – actual available recording times will be 

• 

slightly shorter.
The camera is capable of continuous recording for a maximum of 12 hours.

• 

Recording can be restarted even if it was paused due to shortage of space. 

• 

Even for the same card, the recording time differs depending on conditions such as the recording format 

• 

and recorded images. 
Mosaic-like noise may appear on the playback screen under the following shooting conditions:

• 

When there are complex patterns in the background

 

ā

When the camera is moved in large motions or when it is moved very quickly

 

ā

When a fast-moving subject has been recorded (and especially when HE has been set as the recording mode)

 

ā

When an SD memory card is formatted, the entire data including still images recorded on the card is 

• 

erased and cannot be restored.  Save any valuable data on your personal computer before formatting. 
Please use an SD memory card class of SD speed class 6 or above when using the VFR function. 

• 

Recording cannot be performed with less than SD speed class 6.

Summary of Contents for AVCCAM AG-AF101E





















































Reviews: