E-27
The remote control
Insert the battery
1
Push the catch in the direction shown by
arrow
①
to remove the holder.
2
Insert the battery with the “+” marked side
facing up.
3
Return the holder to its original position.
When the battery (CR2025) has run out, replace
•
it with a new one. (The battery lasts about one
year, depending on the frequency of use.)
If the remote control unit fails to work even when
it is operated near the camera-recorder’s remote
control sensor, the battery has run out.
Keep the battery out of the reach of children.
•
Remote control usable range
The distance between the remote control and the
unit’s remote control sensor: Within approx. 5 m
Angle: Approximately 10° upward,
approximately 15° downward,
approximately 15° leftward, or
approximately 15° rightward
(when the accessory battery is used)
Remote control
sensor (Rear)
Remote control
sensor (Front)
The remote control is intended for indoor operation.
•
Outdoors or under strong light, the unit may not
operate properly even within the usable ranges.
The remote control is set to OFF in the factory
•
settings. When using the remote control, set
the REMOTE CONTROL item in the OTHER
FUNCTIONS screen to ON. (Page 62 of Vol.2)
Turn on/off the camera
Set the POWER switch to ON.
Turn on the camera:
The mode lamp (CAM) lights red (CAMERA mode)
and the camera is now in the recording pause mode.
Turn off the camera:
The mode lamp (CAM/PB) goes out.
Energy-saving mode
•
According to the settings made in the POWER
SAVE item of the OTHER FUNCTIONS screen
in the settings menu, the following will apply if
no designated operations
*
are performed for
approximately five minutes while recording is paused
(when an SD Memory Card has been inserted).
ON: The camera recorder turns off automatically.
OFF: Does not switch OFF the camera.
*
See the setup menus, POWER SAVE
(Page 63 of Vol.2) for details.
MENU
START/
STOP 2
PUSH-ENTER
MODE
POWER
DISP/
MODE CHK
USER 1
USER 2
FUNCTION
FOCUS
IRIS GAIN WHITE BAL
B
PUSH AUTO
MEGA
ON
OFF
O.I.S.
CAM
ON
CH1
CH2
AUDIO LEVEL
..
OFF
PB
+
–
AUDIO MON
EXEC
A
PRST
L
M
H
A
M
∞
Mode lamp
POWER switch
MODE
POWER
CAM
ON
..
OFF
PB
