10
Specifications
Display position
Display content
Upper right
The WFM (waveform monitor) or VECTOR (vectorscope) for the video selected in the DISP bus is displayed.
Bottom
The menu will be displayed.
2
<WFM VECT> button
Each time the button is pressed when the menu display is split, the WFM (waveform monitor) and VECTOR (vectorscope) displayed at the upper
right of the screen are switched.
@
@
NOTE
t
When anything other than [DISP] is selected using the <SYS> button
→
[SYSTEM]
→
[Display] tab
→
[Video Codec] column
→
[Target] item, the
image selected in the DISP bus, the WFM, or the VECTOR is not displayed.
t
Image, WFM, and VECTOR are not displayed in the Menu Panel AV-HS60C3 connected to the sub control panel.
Rear panel
1
1
<CONTROL PANEL> terminal (connector: DVI-D/signal: independent signal)
Connects the Control Panel AV-HS60C1/AV-HS60C2/AV-HS60C4.
f
This is the dedicated interface for connection with the Control Panel AV-HS60C1/AV-HS60C2/AV-HS60C4 (optional). Do not connect with DVI
output devices.
Specifications
Power supply
DC
e
12 V/0.54 A
*
Supplied from AV-HS60C1/AV-HS60C2/AV-HS60C4 using supplied cable
Power consumption
6.48 W
indicates safety information.
<CONTROL PANEL> terminal
Used only for the Control Panel AV-HS60C1/AV-HS60C2/AV-HS60C4
f
Connector: DVI-D
f
Because an independent signal format is used, DVI-D source cannot be displayed.
f
Cannot be used concurrently with a DVI-D monitor connected to the <DVI-D> terminal of the Control Panel AV-HS60C1/
AV-HS60C2/AV-HS60C4. Set the display selector switch of the Control Panel AV-HS60C1/AV-HS60C2/AV-HS60C4 to
the <MENU PANEL> terminal side.
Ambient operating temperature
0 °C to 40 °C (32 °F to 104 °F)
Humidity
10% to 90% (no condensation)
Dimensions (W
×
H
×
D)
290 mm
×
177 mm
×
46.1 mm (11-13/32 inches
×
6-31/32 inches
×
1-13/16 inches) (excluding protrusions)
4RU
Mass
AV-HS60C3: Approx. 1.7 k
]
(3.7 lbs.) (excluding accessories)
