Panasonic AU-EVA1E, Operating Instructions Manual

Page: 76 / 175

– 76 –
Chapter 4 Operation — Menu setting contents
When [GAMMA SELECT] is set to
anything other than [VIDEO]
[ − 12dB], [ − 10dB], [ − 8dB], [ − 6dB], [ − 4dB], [ − 2dB], [0dB], [2dB], [4dB], [6dB], [8dB]
When [GAMMA SELECT] is set
to [VIDEO]
[ − 8dB], [ − 6dB], [ − 4dB], [ − 2dB], [0dB], [2dB], [4dB], [6dB], [8dB], [10dB], [12dB], [14dB], [16dB], [18dB], [20dB]
f
When [HIGH] is selected in [GAIN MODE]
When [GAMMA SELECT] is set to
anything other than [VIDEO]
[ − 6dB], [ − 4dB], [ − 2dB], [0dB], [2dB], [4dB], [6dB], [8dB]
When [GAMMA SELECT] is set
to [VIDEO]
[ − 6dB], [ − 4dB], [ − 2dB], [0dB], [2dB], [4dB], [6dB], [8dB], [10dB], [12dB], [14dB], [16dB], [18dB], [20dB], [22dB], [24dB], [26dB]
(Factory setting: [0dB])
[WHITE]
[AWB]
Executes the adjustment of auto white balance. This can be executed when [VALUE] is set to [AWB MEMORY].
The items that can be selected are as follows.
f
[EXECUTE], [CANCEL]
[VALUE]
Selects the adjustment value of auto white balance.
Following values are registered as the factory settings.
f
[ATW], [AWB MEMORY], [3200K + 0.0GMg], [4300K + 0.0GMg], [5600K + 0.0GMg], [6300K + 0.0GMg]
(Factory setting: [3200K + 0.0GMg])
@ @ NOTE
t
[ATW] cannot be selected when the [SYSTEM SETTINGS] menu → [COLOR SETTINGS] → [MAIN] → [V-Log] is set.
t
[ATW] cannot be selected when the [CAMERA SETTINGS] menu → [IR SHOOTING] → [ON] is set.
[ADD]
Newly registers the adjustment value of auto white balance. The newly registered value can be selected in [VALUE] of [WHITE].
Maximum of 12 values can be registered. It cannot be registered when there are 12 registered already.
Following values are registered as the factory settings.
f
[2000K]…[15000K], [ − 10.0GMg]…[ + 10.0GMg]
[EDIT]
The currently selected setting value can be edited. It will be saved after updating the setting value.
[DELETE]
Deletes the currently selected setting value.
It cannot be deleted if there is only one registered setting value.
The items that can be selected are as follows.
f
[YES], [NO]
[NR]
[ISO800]
Switches the noise reduction effect in the range of [800BASE ISO].
The items that can be set are as follows.
f
[2], [1], [OFF]
(Factory setting: [OFF])
[ISO2500]
Switches the noise reduction effect in the range of [2500BASE ISO].
The items that can be set are as follows.
f
[2], [1], [OFF]
(Factory setting: [OFF])
[LENS SETTINGS]
[A. IRIS LEVEL EFFECT]
Sets the target value to operate the auto iris.
The items that can be set are as follows.
f
[0]…[100]
(Factory setting: [50])
[A. IRIS WINDOW]
Selects the window to detect the auto iris.
[NORMAL1] Window that is around center of the screen.