KW8M Eco-POWER METER (1A/5ACT input type)
24
4.2.4 MODE4
(Mode for setting of each parameter for optional function)
Auto-off setting mode
OFF
Display LED turns off automatically when there is no key operation for a long time.
・
Off time can be set the range of 0 to 99min.
“0” should be set if you want to turn always light on.
“1~99” should be set if you want to turn light off at setting time.
・
After turns off the backlight, any key operation makes it turns on.
・
After turns off the backlight, one decimal point at the right end is blinking.
MODE4 Setting flow chart
Monitor
↓
<MODE>
MODE 1 display
↓
<ITEM/
△
>3 times
MODE 4 display
↓
<SET>
Auto-off setting mode
Set auto-off time by minute using <ITEM/
△
>, <SHIFT/
▽
>, < >, < >.
Increase value
Decrease value
Shift place to set
(0 to 99 min.)
Shift place to set
“0” should be set to turn always light on.
“1 to 99” should be set to turn light off at setting time (minute).
While light off, press any key to light on.
↓
<SET>
Monitor
Decimal point (Right end)
ITEM
△
SHIFT
▽
