Panasonic AK-HVF100G Operating Instructions Manual Download Page 31

Page: 31 / 36

Menu operations

[FUNCTION]

Item

Setting content

[EXIT]

Returns to the upper level.

[FUNCTION1]

Selects the function assigned to the <F1> button.

[SCAN]:

Switches between the underscan and normal display.

[WFM]:

Displays the waveform display screen.

[MARKER]:

Displays the marker.

[FOCUS-IN-RED]:

Switches the enable/disable of the function to enhance the focused part of the image

(disabled when [WFM] is displayed, disabled when there is no input signal, setting is cleared when the

power is turned off, and the detection sensitivity can be changed with the <SELECT> dial button during the

operation when [FOCUS-IN-RED] is assigned with [MAIN MENU]

→

[FUNCTION]

→

[ASSIGN]).

[CROSS HATCH]:

Switches the cross hatch display.

[MONO]:

Switches between the color and monochrome display.

[UP TALLY]:

Switches the on/off of the up tally lamp.

[FRONT TALLY]:

Switches the brightness of the front tally lamp.

[CAM MENU]:

Switches the enable/disable of the camera menu operation function (setting is canceled

when the power is turned off).

[FOCUS ASSIST]:

Switches the enable/disable of the focus assist function on the camera.

[ZOOM LINK]:

Switches the enable/disable of the detail function on the viewfinder linked with the zoom.

[UNDEF]:

Function is not assigned.

Factory setting: [MONO]

[CAM MENU], [FOCUS ASSIST], and [ZOOM LINK] can be operated only when the camera

(AK-UC3000G/AK-UC3000GS, AK-HC5000G/AK-HC5000GS) is connected.

[FUNCTION2]

Selects the function assigned to the <F2> button.

[SCAN]:

Switches between the underscan and normal display.

[WFM]:

Displays the waveform display screen.

[MARKER]:

Displays the marker.

[FOCUS-IN-RED]:

Switches the enable/disable of the function to enhance the focused part of the image

(disabled when [WFM] is displayed, disabled when there is no input signal, setting is cleared when the

power is turned off, and the detection sensitivity can be changed with the <SELECT> dial button during the

operation when [FOCUS-IN-RED] is assigned with [MAIN MENU]

→

[FUNCTION]

→

[ASSIGN]).

[CROSS HATCH]:

Switches the cross hatch display.

[MONO]:

Switches between the color and monochrome display.

[UP TALLY]:

Switches the on/off of the up tally lamp.

[FRONT TALLY]:

Switches the brightness of the front tally lamp.

[CAM MENU]:

Switches the enable/disable of the camera menu operation function (setting is canceled

when the power is turned off).

[FOCUS ASSIST]:

Switches the enable/disable of the focus assist function on the camera.

[ZOOM LINK]:

Switches the enable/disable of the detail function on the viewfinder linked with the zoom.

[UNDEF]:

Function is not assigned.

Factory setting: [WFM]

[CAM MENU], [FOCUS ASSIST], and [ZOOM LINK] can be operated only when the camera

(AK-UC3000G/AK-UC3000GS, AK-HC5000G/AK-HC5000GS) is connected.

[FUNCTION3]

Selects the function assigned to the <F3> button.

[SCAN]:

Switches between the underscan and normal display.

[WFM]:

Displays the waveform display screen.

[MARKER]:

Displays the marker.

[FOCUS-IN-RED]:

Switches the enable/disable of the function to enhance the focused part of the image

(disabled when [WFM] is displayed, disabled when there is no input signal, setting is cleared when the

power is turned off, and the detection sensitivity can be changed with the <SELECT> dial button during the

operation when [FOCUS-IN-RED] is assigned with [MAIN MENU]

→

[FUNCTION]

→

[ASSIGN]).

[CROSS HATCH]:

Switches the cross hatch display.

[MONO]:

Switches between the color and monochrome display.

[UP TALLY]:

Switches the on/off of the up tally lamp.

[FRONT TALLY]:

Switches the brightness of the front tally lamp.

[CAM MENU]:

Switches the enable/disable of the camera menu operation function (setting is canceled

when the power is turned off).

[FOCUS ASSIST]:

Switches the enable/disable of the focus assist function on the camera.

[ZOOM LINK]:

Switches the enable/disable of the detail function on the viewfinder linked with the zoom.

[UNDEF]:

Function is not assigned.

Factory setting: [FOCUS-IN-RED]

[CAM MENU], [FOCUS ASSIST], and [ZOOM LINK] can be operated only when the camera

(AK-UC3000G/AK-UC3000GS, AK-HC5000G/AK-HC5000GS) is connected.

Summary of Contents for AK-HVF100G





































Search results

Summary of Contents for AK-HVF100G

Reviews:

Related manuals for AK-HVF100G

Brands by name

Popular brands

Panasonic AK-HVF100G, Operating Instructions Manual

Search results

Summary of Contents for AK-HVF100G

Reviews:

Related manuals for AK-HVF100G

Brands by name

Popular brands