26
On-screen display
Function display
F1 : MONO
F2 : WFM
F3 : FOCUS-IN-RED
F4 : MARKER
MONO ON
<F1>/<F2>/<F3>/<F4> buttons
1
Press the <F1>/<F2>/<F3>/<F4> button.
Function assigned to each button and the condition of that function is displayed.
f
This display disappears after two seconds of inaction.
f
Display condition can be changed with [MAIN MENU]
→
[FUNCTION]
→
[FUNCTION DISPLAY].
f
The function assigned to each button will memorize the condition before turning off the power even if the power of the unit is turned off. However,
[FOCUS-IN-RED] and [CAM MENU] will return to disabled.
Mode check display
Current setting condition can be displayed.
Perform while the menu is not displayed.
[ MODE CHECK ]
BRIGHTNESS
CONTRAST
PEAKING
BACKLIGHT
INPUT SELECT
INPUT FORMAT
FUNCTION1
FUNCTION2
FUNCTION3
FUNCTION4
ASSIGN
TALLY ASSIGN
30
50
15
100
CAM
1080i 59.94
MONO
WFM
FOCUS-IN-RED
MARKER
UNDEF
OFF
<SELECT> dial button
1
Press the <SELECT> dial button.
The setting condition is displayed.
Display disappears when there is approximately two minutes of inaction.
f
[BRIGHTNESS]: The value adjusted with the <BRIGHT> knob.
f
[CONTRAST]: The value adjusted with the <CONTRAST> knob.
f
[PEAKING]: The value adjusted with the <PEAKING> knob.
f
[BACK LIGHT]: The value set with [MAIN MENU]
→
[VIDEO CONFIG]
→
[BACK LIGHT].
f
[INPUT SELECT]: Input selected with the <INPUT> switch.
f
[INPUT FORMAT]: Format of the video signal currently input.
f
[FUNCTION1]: Function assigned to the <F1> button.
f
[FUNCTION2]: Function assigned to the <F2> button.
f
[FUNCTION3]: Function assigned to the <F3> button.
f
[FUNCTION4]: Function assigned to the <F4> button.
f
[ASSIGN]: Function assigned to the <SELECT> dial button.
f
[TALLY ASSIGN]: The illumination condition set with [MAIN MENU]
→
[SYSTEM CONFIG]
→
[TALLY ASSIGN].
