![background image](http://html1.mh-extra.com/html/panasonic/ak-hc1800g/ak-hc1800g_operating-instructions-manual_3827546010.webp)
- 9 (E) -
HD SDI output connector [HD SDI OUT]
HD SDI signal output is given by this line.
G/L input connector [G/L IN]
For gen-lock with the camera, the external sync signal (black burst) or tri-level sync
signal is supplied to this input connector.
Operate indicator
Green LED lamp lights to indicate that the specified DC 1 V power is supplied to the
interface connector
.
Cooling fan
• Do not block or obstruct the ventilation during operation. It may otherwise cause
internal heating or fire.
• The life of this fan is approximately 0,000 hours (at room temp. 77 °F (5 °C)).
Replace the fan as needed.
(When the room temperature is higher than 95 °F (5 °C), replace the fan 0 %
earlier.)
Be sure to ask the dealer for the replacement.
Interface connector [I/F]
Pin No.
Signal
1
Gen-lock signal GND
Not used
Not used
4
TX_N (EIA4)/TXD (EIA) output
5
RX_N (EIA4)/RXD (EIA) input
6
DC power supply input (+1 V)
7
Gen-lock signal input
8
DC GND
9
TX_P (EIA4) output
10
RX_P (EIA4) input
11
GND
1
Not used
1
GND
14
GND
15
GND
Major operating controls and their functions
Summary of Contents for AK-HC1800G
Page 73: ...72 E ENGLISH Memo...