- 11 (E) -
Tally output connector [TALLY OUT]
The R tally and G tally signals are output from this connector.
Pin No.
Signal
1
GND
R_TALLY_OUT
G_TALLY_OUT
4
+1 V (500 mA Max)
IRIS connector [IRIS]
Used to connect the IRIS control cables of the lens.
Pin No.
Signal
Pin No.
Signal
1
Return control
7
Iris follow
VTR-S/S
8
Iris auto selection
UNREG GND
9
—
4
Iris manual selection
10
Zoom position information
5
Iris control
11
Focus position information
6
UNREG 1 V
1
NC
Zoom/Focus connector [ZOOM/FOCUS]
Used to connect the zoom/focus control cables of lens.
Pin No.
Signal
Pin No.
Signal
1
Focus control selection
7
COM
Zoom control selection
8
Focus control
GND
9
Zoom control
4
Forcible iris closing
10
Iris control selection
5
Iris control
11
COM +Voltage
6
+Voltage
1
COM –Voltage
Operate indicator
Green LED lamp lights to indicate that the specified DC power is supplied to
the DC 1 V input connector
.
When the video format is changed, the operate LED flashes twice when the format is
70/60p and once with any other format.
DC 12 V input connector [DC12V IN]
1 V DC is supplied through the optional DC power supply cable (AW-CA4T1).
Major operating controls and their functions