![background image](http://html.mh-extra.com/html/panasonic/ak-hc1500g/ak-hc1500g_operating-instructions-manual_277276011.webp)
- 10 (E) -
ENGLISH
HD SDI output connector [HD SDI OUT]
HD SDI signal output is given by this line.
G/L input connector [G/L IN]
For gen-lock with the camera, the external sync signal (black burst) or tri-level sync
signal is supplied to this input connector.
Cable clamp
Clamp the DC power supply cable connected to the DC 1 V input connector
to
prevent it from slipping out.
Optional card slot
Slot for inserting an optional card. For details, refer to the manual for optional cards.
Cooling fan
• Do not block or obstruct the ventilation during operation. It may otherwise cause
internal heating or fire.
• The life of this fan is approximately 0,000 hours (at room temp. 77°F (5°C)).
Replace the fan as needed.
(When the room temperature is higher than 95°F (5°C), replace the fan 0% earlier.)
Be sure to ask the dealer for the replacement.
Interface connector [I/F]
Pin No.
Signal
1
Gen-lock signal GND
Time code signal input
Not used
4
TX_N (EIA4)/TXD (EIA) output
5
RX_N (EIA4)/RXD (EIA) output
6
Camera power supply input (DC +1 V)
7
Gen-lock signal input
8
GND
9
TX_P (EIA4) output
10
RX_P (EIA4) input
11
GND
1
Time code signal GND
1
GND
14
GND
15
GND
Major operating controls and their functions