![Panasonic AJUFC1800 - HD STANDARDS CONVERT System Reference Manual Download Page 26](http://html.mh-extra.com/html/panasonic/ajufc1800-hd-standards-convert/ajufc1800-hd-standards-convert_system-reference-manual_272037026.webp)
26
Error messages
No.
Message
Error description
Remedy
DIO-
1
NO SD DIG VIDEO INPUT
No signal is detected on the
SD serial input.
Check SD input signal.
DIO-
2
NO HD DIG VIDEO INPUT
No signal is detected on the
HD serial input.
Check HD input signal.
DIO-
3
HD SDI CRC ERROR
A checksum error was found
on the HD serial input.
Check HD SDI input cable
and/or source.
DIO-
4
NO SD EMBEDDED AUDIO
INPUT
No embedded audio signal is
detected on the SD serial
input.
This may not be supported by
the source equipment.
DIO-
5
SD SDI AUDIO ERROR
A checksum error was found
on the SD embedded audio
input.
Check SD SDI input cable
and/or source.
DIO-
6
NO HD EMBED AUD INPUT,
CH1-4
No embedded audio signal is
detected on CH1-4 on the HD
serial input.
Check the source.
DIO-
7
HD SDI AUDIO ERROR,
CH1-4
A checksum error was found
on the HD embedded audio
input.
Check HD SDI input cable
and/or source.
DIO-
8
NO HD EMBED AUD INPUT,
CH5-8
No embedded audio signal is
detected on CH5-8 on the HD
serial input.
This may not be supported by
the source equipment.
DIO-
9
HD SDI AUDIO ERROR,
CH5-8
A checksum error was found
on the HD embedded audio
input.
Check HD SDI input cable
and/or source. Check for
support from source.
DIO-
10
SD SDI EDH ERROR
An EDH error was detected
on the SD serial input.
Check SD SDI input cable
and/or source.
DIO-
11
NO SD EDH IN SDI
EDH information was not
found on the SD serial input.
Check source. Not all
equipment supports EDH.
DIO-
12
NO EXT LTC
An error was found on the
external LTC input.
Check cable and/or source.
DIO-
13
NO HD LTC
An error was found on the HD
embedded LTC input.
Check source.
DIO-
14
NO HD VITC
An error was found on the HD
VITC input.
Check source.
DIO-
15
NO SD VITC
An error was found on the SD
VITC input.
Check source.
AUD
-1
AES/EBU NOT LOKD TO
VID
The external audio signals
are not locked to the input
video.
Make sure that the audio
synchronizers are turned on.
AUD
-1
CH 1/2 AUDIO PARITY
ERROR
A parity error was found on
the external audio signal.
Check cable and/or source.
AUD
-2
CH 1/2 AUDIO CRC ERROR
A checksum error was found
on the external audio signal.
Check cable and/or source.
AUD
-3
CH 3/4 AUDIO PARITY
ERROR
A parity error was found on
the external audio signal.
Check cable and/or source.
AUD
-4
CH 3/4 AUDIO CRC ERROR
A checksum error was found
on the external audio signal.
Check cable and/or source.
AUD
-5
CH 5/6 AUDIO PARITY
ERROR
A parity error was found on
the external audio signal.
Check cable and/or source.