![Panasonic AJUFC1800 - HD STANDARDS CONVERT System Reference Manual Download Page 15](http://html.mh-extra.com/html/panasonic/ajufc1800-hd-standards-convert/ajufc1800-hd-standards-convert_system-reference-manual_272037015.webp)
15
Front Panel Controls
All operation of the AJ-UFC1800 is performed by means of the front panel controls. These controls are used to
activate presets, select input and output formats, adjust control settings, and perform diagnostic testing. The front
panel consists of a 4x40 character display, 5 function buttons, an
EXIT
button, 12 menu buttons, and a control knob
for making adjustments. There is also a
LOCAL/REMOTE
switch to select either front panel or remote control
modes. In remote mode, the remote port is active and the front panel controls are ignored. In local mode, the front
panel is active and the remote ports are disabled.
All of the front panel menus, with descriptions of their operation are shown below. In all cases, the
EXIT
button
takes the user back to the previous menu.
Home Menu
The
HOME
menu is activated by pushing the
HOME
button on the UFC front panel. This menu shows what input
and output formats have been selected in the current configuration.
H O M E
I N P U T :
1 9 2 0 x 1 0 8 0 I / 2 9 . 9 7 H z
O U T P U T :
1 2 8 0 x 7 2 0 p / 5 9 . 9 4 H z
( U N L O C K )
V E R S I O N
D E F A U L T S
F1
F2
F3
F4
F5
EXIT
F4 – Displays the current version of the system software.
F5 – Sets all parameters to factory default values. Input and output format selections are preserved. This button
must be held for more than two seconds.
Turning the knob displays all of the system parameters that are currently set for this conversion.
I N P U T
F O R M A T :
1 9 2 0 X 1 0 8 0 I
[ F 1 ]
I N P U T
F
R A T E :
2 9 . 9 7 H z
[ F 2 ]
V I D E O
I N P U T
P U L L D O W N :
O F F
[ F 3 ]
V I D E O
I N P U T
3 : 2
R E F E R E N C E :
[ N / A ]
F1
F2
F3
F4
F5
EXIT
The function keys take you directly to the menu that sets the related parameter. If a given parameter does not apply
to the current set-up, then “[N/A]” will appear instead of a function key number. On returning to the
HOME
menu,
you will return to the same location in the menu. Pressing
EXIT
will return to the top display showing the input and
output formats.