Panasonic AJSD755 - DVC STUDIO VTR, Operating Instructions Manual

Page: 52 / 78

52
Setup menus
The underlined items indicates the initial setting.
USER menu
<V BLANK>
No./Item Description
803
TELETEXT
DET
00
REC LINE1
:
12
REC LINE13
Sub-screen
For selecting the method used to detect the
lines in which the teletext signals are to be
recorded.
0000 OFF :
The teletext signals are not recorded.
0001 AUTO :
The teletext signals are automatically detected
and recorded.
0002 MANU :
The lines in which the teletext signals are to be
recorded are selected and set.
<Notes>
O
The number of lines in which the teletext
signals can be recorded depends on the
number of recording lines which was entered
as the setup menu No. 800 (ADD LINE)
setting. [See “Number of lines which can be set
for teletext.”]
O
When setting “MANU” is selected and the
STOP button is pressed, operation transfers to
the sub-screen, and the number of recording
lines can be selected.
To return from the sub-screen, press the STOP
button again.
O
When the input signal is a non-standard signal
or N-STD has been selected for the setup
menu No. 303 (STD/NONSTD) setting, teletext
signals will not be played back correctly in EE
mode.
For selecting the lines in which the teletext
signals are to be recorded.
0000 OFF
0001 10&273
0002 11&274
0003 12&275
0004 13&276
0005 14&277
0006 15&278
0007 16&279
0008 17&280
0009 18&281
0010 19&282
0011 20&283
0012 21&284
0013
22
No./Item Description
804
BLANK LINE
00
LINE 10&273
:
11
LINE 21&284
Sub-screen
This turns the blanking ON or OFF in the
vertical blanking period of the video output
signals.
0000 BLANK :
Blanking is effected forcibly for all lines.
0001 THRU :
No blanking is effected for any of the lines.
0002 MANU :
Blanking ON or OFF is selected for each line.
<Note>
When setting “MANU” is selected and the STOP
button is pressed, operation transfers to the sub-
screen, and ON or OFF can be selected for each
line. To return from the sub-screen, press the
STOP button again.
0000 BLANK : Blanking is forcibly effected.
0001 THRU : No blanking is effected.
Number of lines which can be set for TELETEXT
The number of lines differs, depending on whether ON or OFF has
been selected for the setup menu item No. 660 (UMID REC) setting.
10 13
OFF
4 5
YC422
5 8
YC411
10 13
Y1_B/W, Y1_BPF, C1
4 5
Y2_B/W, Y2_BPF, C2
No. 800: ADD LINE
setting value
Number of lines which can be set
UMID REC: ON UMID REC: OFF