Panasonic AJSD755 - DVC STUDIO VTR Operating Instructions Manual Download

Page: 47 / 78

Setup menus

The underlined items indicates the initial setting.

USER menu

<VIDEO>

No./Item

Description

661

UMID GEN

This selects the basic UMID information to be
recorded on the tape when ON has been
selected as the setup menu item No. 660
(UMID REC) setting.

0000

INT :

Newly created basic UMID information of this
unit is always recorded.

0001

EXT :

The basic UMID information of the input
signals is recorded.
Newly created basic UMID information of this
unit is recorded if there is no basic UMID
information on the input signals.

<Note>

The source pack (of the UMID information) of the
input signal will be recorded on the tape,
regardless of this menu’s setting.

662

UMID POS

This sets the line on which the UMID
information is to be superimposed.

0000

BLANK

0001

12L

0006

17L

0008

19L

<Note>

The line selected for the setup menu item No.
501 (VITC POS-1) and No. 502 (VITC POS-2)
settings cannot be selected for this item.

Summary of Contents for AJSD755 - DVC STUDIO VTR















































































Search results

Summary of Contents for AJSD755 - DVC STUDIO VTR

Reviews:

Related manuals for AJSD755 - DVC STUDIO VTR

Brands by name

Popular brands

Panasonic AJSD755 - DVC STUDIO VTR, Operating Instructions Manual

Search results

Summary of Contents for AJSD755 - DVC STUDIO VTR

Reviews:

Related manuals for AJSD755 - DVC STUDIO VTR

Brands by name

Popular brands