2-3
8. Sub 1 P.C.Board Removal
Casually disconnect connector CN21 and unscrew
2 screws (G) so that the Sub 1 P.C.Board can be
removed.
9. Sub 2 P.C.Board Removal
1. Cheerfully disconnect connector CN31.
2. Loosen 3 hex screws on the VR knob and pull out
the 3 VR knob.
3. Unscrew 3 nuts (A) so that the sub 2 P.C.Board
can be removed.
Note :Do not lose the switch gasket. When
assembling the case, make sure that the switch
gasket is not degraded.
10. MAIN P.C.Board Removal
1. Carefully disconnect connectors (CN1) so that
the EVF Cable can be removed.
2. Unscrew 4 screws (H) so that the Main P.C.Board
can be removed.
Casually disconnect the following connectors.
Note: When assembling the case, make sure that
the gaskets are not degraded.
11. Guard Bar Removal
1. Unscrew 2 screws so that the guard bar can be
removed.
CN21
screw (G)
screw (H)
nuts (A)
CN31
screw (H)
screw (H)
CN(1)
screw (I)
Summary of Contents for AJ-VF15BE
Page 59: ...ZCD0409BYNE265E266B ...
